Denbigh driveway gates

Hardwood driveway gates

Denbigh driveway gates shown in Idigbo (Hardwood).

These gates are made by our time served craftsmen specifically to fit your measurements.

The gate is based on our tried and trusted wedged morticed and tenon solid frame and supplied either fully close boarded as shown or as an open boarded gate.

Want to fit the Denbigh driveway gates into an enclosed opening?

Want to get rid of the joggles (horn like protrusions) at the top of the gates? You can read more on this over on our Denbigh pedestrian gate page

Hardwood Denbigh driveway gates

The Denbigh (Rear shown above, again in Idigbo) is our most economical gate of our standard made to measure range.

We can supply our Denbigh driveway gates without the protruding joggles if you intend to fit the gates within an enclosed brickwork opening.

Get a quote on our Denbigh driveway gates

Denbigh driveway gates – specifications

All top edges on any horizontal rails of the Denbigh feature an angled water run off, this stops the build up of moisture on your gates and makes for a longer lifespan. The stiles of the Denbigh driveway gate (vertical outer uprights of the gate frame) also have rounded outer edges.

Available in the following timbers
Prime European Oak (Hardwood),
Accoya (Modified Softwood),
Idigbo (Hardwood),
Meranti (Hardwood),
Scandinavian Redwood (Softwood)

Automation – Can be automated, please contact us for details
Construction – Through wedged, morticed & tenoned jointed frame

Height – Made to measure
Width – Made to Measure
Stiles – 2 3/4″ x 2 3/4″ / 70mm x 70mm
Top rail/Head – 2 3/4″ x 2 3/4″ / 70mm x 70mm
Hidden rails (visible from rear only) – 2 3/4″ x 1 7/8″ / 70mm x 48mm
Boarding – 3 3/4″ x 5/8″ / 95mm x 15mm

Denbigh guide prices

The Denbigh guide prices are based on a pair of gates 6ft high x 6ft overall wide (approx 1830mm high x 1830mm overall wide) equally split gates, these are NOT from prices, smaller gates will be more economical etc – contact us for a price! All prices are correct time of insertion and are EX VAT. Free delivery to most parts of the UK mainland is included – exclusions do apply, again please contact us.


Scandinavian Redwood – Softwood £431

We use Unsorted Scandinavian Redwood, despite it’s name it is sorted for smaller knot size and less of them for better strength. Creamy white to yellow in colour.
Can be painted or stained.
Approx weight guide 550 KG/M3


Meranti – Hardwood £737

Used as a Mahogany substitute. Can vary in colour from a pinky red to dark red colour.
Can be painted or stained.
Approx weight guide 550-710 KG/M3


Idigbo – Hardwood £909

A plain light brown timber which gives the Oak look but without the Oak price tag. As strong as English Oak. Also known in the trade as ‘poor mans oak’.
Can be stained, however avoid painting.
Approx weight guide 560 KG/M3


Accoya – Modified Softwood £1103

The most longer lasting timber on the market! Doesn’t absorb water so doesn’t rot, also as water is not absorbed then any movement within the timber is minimal! Ideal even for the most challenging enviroments. Timber is guaranteed for 50 years againts rot and decay. Recommended ironmongery and fixings for Accoya is Marine Grade Stainless Steel. Can be painted or stained.
We use Grade A1 Accoya specially sorted with few knots.
Approx weight guide 510KG/M3


European Oak – Hardwood £1494

Oak needs no introduction, appearance wise it is a light yellow to brown colour. We use the Prime grade of European Oak with fewer knots for unbeatable strength and maximum wow factor! Recommended fixings for Oak is Marine Grade Stainless Steel.
Can be stained, as with Idigbo avoid painting.
Approx weight guide 720 KG/M3

Get a quote on our Denbigh driveway gates

Want a personalised costing on our Denbigh gates? Please get in touch using the form below, you can also speak to one of our joiners on 01745 362444 for a price.
  • Need the gate delivering? Not a problem, please leave us your Postcode/County of the delivery location
  • Please leave us the height and width of the gates required.
  • This field is for validation purposes and should be left unchanged.