Harlech pedestrian gates

Through wedged morticed and tenon jointed frame? Check (everything we manufacture is)!

Manufactured in our specially selected timbers? Check!

Made to measure? Check!

Choice, elegant underswept head? Check!

In fact the Harlech pedestrian gates has everything you’ve come to expect with one of our gates, put simply not only does it look great but we make it properly too (that would be the three generations of joinery know how we have)!

Harlech side access gates

Harlech gates with their curved, underswept head. Shown in Unsorted Softwood – click for a bigger image!

Available as either a pair of driveway gates or smaller garden gate, our Harlech gate features a stunning diminishing ‘underswept’ head which frames an elegant open vision area, divided by vertical uprights.

Get a Harlech quote

Harlech pedestrian gate rear view

Rear view of the Harlech pedestrian gates – click to see more!

The Harlech single, shown above, is the Unsorted Scandinavian Redwood (Softwood), fully boarded version. Hardwood versions (Prime European Oak, Meranti & Idigbo) as well as modified Accoya Softwood versions are also available and the gate is also manufactured as an open boarded gate and what is more the Harlech is also manufactured as a pair of driveway gates and smaller single garden gate.

Harlech driveway gates – Specifications

All top edges on any horizontal rails of our Harlech gate feature an angled water run off, this stops the build up of moisture on your gates and makes for a longer lifespan. The stiles of the Harlech gate (vertical outer uprights of the gate frame) also have rounded outer edges.

Available in the following five beautiful timbers
Prime European Oak (Hardwood),
Accoya (Acetylated Softwood),
Idigbo (Hardwood),
Meranti (Hardwood),
Scandinavian Redwood (Softwood)

Construction – Through wedged, morticed & tenoned jointed

Height – Made to measure
Width – Made to Measure
Stiles – 2 3/4″ x 2 3/4″ / 70mm x 70mm
Top rail/Head – 5 3/4″ reducing down to 2 3/4″ x 2 3/4″ / 145mm reducing down to 70mm x 70mm
Middle rails – 2 3/4″ x 2 3/4″ / 70mm x 70mm
Hidden rails (visible from rear only) – 2 3/4″ x 1 7/8″ / 70mm x 48mm
Boarding – 3 3/4″ x 5/8″ / 95mm x 15mm
Infill (top ‘open vision panel’ section)– 1 3/4″ x 3/4″ / 45mm x 18mm (with gaps of no more than 8″/200mm between uprights)

Harlech guide prices

The Harlech guide prices are based on a gate 6ft high x 3ft overall wide (approx 1830mm high x 915mm wide), these are NOT from prices, smaller gates will be more economical etc – contact us for a price! All prices are correct time of insertion and are EX VAT. Free delivery to most parts of the UK mainland is included – exclusions do apply, again please contact us.


Scandinavian Redwood – Softwood £284

We use Unsorted Scandinavian Redwood, despite it’s name it is sorted for smaller knot size and less of them for better strength. Creamy white to yellow in colour.
Can be painted or stained.
Approx weight guide 550 KG/M3


Meranti – Hardwood £439

Used as a Mahogany substitute. Can vary in colour from a pinky red to dark red colour.
Can be painted or stained.
Approx weight guide 550-710 KG/M3


Idigbo – Hardwood £514

A plain light brown timber which gives the Oak look but without the Oak price tag. As strong as English Oak. Also known in the trade as ‘poor mans oak’.
Can be stained, however avoid painting.
Approx weight guide 560 KG/M3


Accoya – Modified Softwood £736

The most longer lasting timber on the market! Doesn’t absorb water so doesn’t rot, also as water is not absorbed then any movement within the timber is minimal! Ideal even for the most challenging enviroments. Timber is guaranteed for 50 years againts rot and decay. Recommended ironmongery and fixings for Accoya is Marine Grade Stainless Steel. Can be painted or stained.
We use Grade A1 Accoya specially sorted with few knots.
Approx weight guide 510KG/M3


European Oak – Hardwood £886

Oak needs no introduction, appearance wise it is a light yellow to brown colour. We use the Prime grade of European Oak with fewer knots for unbeatable strength and maximum wow factor! Recommended fixings for Oak is Marine Grade Stainless Steel.
Can be stained, as with Idigbo avoid painting.
Approx weight guide 720 KG/M3

Get a quote on our Harlech pedestrian gates

Would you be happy with our Harlech pedestrian gates? If so please use the form below to get in touch! Alternatively you can also give us a call on 01745 362444 where one of our joiners will be happy to speak to you.* Denotes required fields
  • If delivery is required, then please let us know where will we be sending your gate! Please include either Postcode or the County of the delivery address.
  • Please include height and width of gate required
  • This field is for validation purposes and should be left unchanged.