Nannerch wooden drive gates
Back to >> Wooden driveway gates
Shown right in stained (a Mahogany stain) Meranti (Hardwood), our Nannerch drive gates feature a dinminishing gunstock head which reduces down from the widest point by 2 3/4" (70mm).
Also available made to measure in European Oak, Idigbo (both Hardwoods) and Scandinavian Redwood (Softwood) - the Nannerch is ideal if you want a gate for privacy but want a simple bit of shape at the top of the gates!
As well as the drive gates pictured, our Nannerch gates are also available as a pedestrian gate meaning you can have a complete matching set of drive gates and pedestrian gates to complete the look!
The Nannerch pictured are an 'unequally split' pair (i.e. one gate is bigger than the other), the traditionally split 50/50 split (each gate being the same size) are also available - please contact us with your requirements.
Want a bigger or smaller pair of gates than what is pictured? No problem, as with every pair of drive gates pictured on our website the Nannerch drive gates are made to suit your own drive - however unusual the sizes, give us a call or email for a full personalised costing!
Nannerch wooden drive gate specifications
Available in European Oak, Meranti & Idigbo (hardwoods) and Scandinavian Redwood (softwood)Height - Made to your own requirements, diminishing by 2 3/4" (70mm) from the highest point
Width - Made to your own requirements
Stiles all Ex 3 " x 3 " (75mm x 75mm),
Top rails Ex 7 " x 3 " (175mm x 75mm),
Barefaced/hidden rails (only visible from rear of gate) EX 3" x 2 1/4" (75mm x 54mm)
T&G boarding all Ex 4" x 3/4 " (100mm x 19mm)
Through wedged morticed and tenon jointed construction
Can be automated (Please contact us for details)
All sizes referred to as EX are sawn sizes, once planed the timber will generally finish at approx 1/4" (5mm) less,
i.e. EX 3" (75mm) would generally finish at approx 2 3/4" (70mm).
Need hinges, locks or gate dropbolts - Then please see our wooden gate ironmongery section for more information.
Get a personalised costing on our Nannerch gunstock drive gates
Then please give us a ring on 01745 362444 with the sizes required or use the contact form below for a full costing to suit your requirements.
Please include height and overall width of gates/opening and please indicate any special requirements.If delivery is required please also include your County & Postcode. Required fields are marked *Back to >> Wooden driveway gates
Home | Timber gates | Timber pedestrian gates | Timber estate gates | Timber garage doors
Bespoke wooden gates | How to measure | FAQ | Sitemap
Gate Expectations by Inwood (Cymru) Ltd,
Unit A1 Cefndy Industrial Park, Cefndy Road,
Rhyl, Denbighshire, North Wales, LL18 2HJ, UK