Wooden gates and timber garage doors to your own sizes!

Wooden gates Gate-Expectations Wooden pedestrian gates manufactured to your own sizes
Tel - 01352 718007
gates@woodworkersuk.co.uk
Fax - 01352 719614
Home | Browse wooden gates | Wooden driveway gates | Wooden estate gates | Wooden garage doors
Bespoke wooden gates | How to measure | FAQ | Contact us | Location | Terms & Conditions | Ordering 
Feedback | Sitemap

Wooden pedestrian gates...

Page 1 | Page 2 of 2
All gates are available in Hardwood (Meranti & Idigbo) and Softwood
The Coniston...

Pictured left is a Coniston close boarded single in Softwood.

Specification

Stiles, head, middle rail Ex 3'' x 3'' 
(75mm x 75mm)

Rails, braces Ex 3'' x 2 1/2'' (75mm x 63mm)

T+G  boarding Ex 4'' x 3/4'' (100 x 19mm)

 Timber pedestrian gates - The Coniston
The Coniston is also available as an open boarded gate,  specification for this is same as the close boarded Coniston except for the T+G boards which in the open boarded Coniston are replaced by Ex 3'' x 3/4'' (75mm x 19mm) infill timbers at gaps no greater than 2'' (50mm).
 
The Grasmere...
Wooden pedestrian gates - The Grasmere

Pictured left is a Grasmere close boarded single in softwood.

Specification

Stiles, head, Ex 3'' x 3'' (75mm x 75mm)

Rails, braces Ex 3'' x 2 1/2'' (75mm x 63mm)

T+G  boarding Ex 4'' x 3/4'' (100 x 19mm)

The Grasmere is also available as an open boarded gate,  specification for this is same as the close boarded Grasmere except for the T+G boards which in the open boarded Grasmere are replaced by Ex 3'' x 3/4'' (75mm x 19mm) infill timbers at gaps no greater than 2'' (50mm).

 
If you like either of these gates then please contact us with the sizes you require.
Back to wooden pedestrian gates page 1 Back to wooden gates
All content (c) copyright 1997-2008. All rights reserved.