Denbigh wooden pedestrian gates

The Denbigh pedestrian gate is the most economical of our pedestrian gates, but that is not to say say we skimp on quality or any other aspect of the gate!

The Denbigh is also available as a flat top gate click here to scroll down.

It’s made to the same high standards as the rest of our gates whether you opt for the Softwood version or European Oak gate – it doesn’t matter to us, what matters is that we make you a gate to last!

Fancy a variation? As well as the close boarded version of the gate, an open boarded version (below Idigbo, hardwood) is also available. Again, this can be made specifically for your opening sizes and will be made entirely for you and your home.

Denbigh pedestrian gates

Denbigh pedestrian gate in Scandinavian Redwood. Click for a larger picture.

Open boarded pedestrian gate

Open boarded version of our Denbigh gates. Click to enlarge

Denbigh pedestrian gates from the rear

Rear view of a fully boarded Denbigh gate. Click to enlarge.


Call Ted & The Team

For quality workmanship by time-served Joiners:

Call Ted & The Team on 01745 362444

or email a question to enquiries@woodworkersuk.co.uk

Want a flat top pedestrian gate to fit an enclosed opening?

The Denbigh pedestrian gate can also be manufactured with a flat top to allow installation within an enclosed stone or brickwork opening.

The Denbigh can be fitted within the opening the traditional way with two posts or we can manufacture a matching frame (without a cill) to match.

All we need to know is whether you require posts or a frame and be sure to let us know that it is being fitted within an enclosed opening so we can allow the required clearances for you.

Looking for an arched or curved gate to fit within an enclosed brickwork opening?

If so then check out the sub section on our semi circular arched gates page for more information!

Pedestrian gate fitted in wall

Flat topped Denbigh gate open Flat topped Denbigh gates rear

Denbigh gate in Idigbo, fitted into wall
(Click for larger images)

Wooden gates in a state?
A Matching garden gate and pair of driveway gates are also available

Denbigh pedestrian gates – specifications

All top edges on any horizontal rails of the Denbigh gate feature an angled water run off, this stops the build up of moisture on your gates and makes for a longer lifespan. The stiles of our Denbigh gate (vertical outer uprights of the gate frame) also have rounded outer edges.

Available in a choice of five timbers
Unsorted Scandinavian Redwood (Softwood)
Accoya (Modified Acetylated Softwood)
Meranti (Hardwood)
Idigbo (Hardwood)
Prime European Oak (Hardwood)

Wedged morticed and tenon jointed construction

Height – Made to measure
Width – Made to measure
Heads/top rails & stiles – 2 3/4″ x 2 3/4″ / 70mm x 70mm
Hidden rails – (Visible from rear only) 2 3/4″ x 1 7/8″ / 70mm x 48mm
Boarding – 3 3/4″ x 5/8″/ 95mm x 15mm

Denbigh guide prices

The Denbigh guide prices are based on a single gate 6ft high x 3ft overall wide (approx 1830mm high x 915mm wide), these are NOT from prices, smaller gates will be more economical etc – contact us for a price! All prices are correct time of insertion and are EX VAT. Free delivery to most parts of the UK mainland is included – exclusions do apply, again please contact us.


Scandinavian Redwood – Softwood £258

We use Unsorted Scandinavian Redwood, despite it’s name it is sorted for smaller knot size and less of them for better strength. Creamy white to yellow in colour.
Can be painted or stained.
Approx weight guide 550 KG/M3


Meranti – Hardwood £393

Used as a Mahogany substitute. Can vary in colour from a pinky red to dark red colour.
Can be painted or stained.
Approx weight guide 550-710 KG/M3


Idigbo – Hardwood £445

A plain light brown timber which gives the Oak look but without the Oak price tag. As strong as English Oak. Also known in the trade as ‘poor mans oak’.
Can be stained, however avoid painting.
Approx weight guide 560 KG/M3


Accoya – Modified Softwood £564

The most longer lasting timber on the market! Doesn’t absorb water so doesn’t rot, also as water is not absorbed then any movement within the timber is minimal! Ideal even for the most challenging enviroments. Timber is guaranteed for 50 years againts rot and decay. Recommended ironmongery and fixings for Accoya is Marine Grade Stainless Steel. Can be painted or stained.
We use Grade A1 Accoya specially sorted with few knots.
Approx weight guide 510KG/M3


European Oak – Hardwood £764

Oak needs no introduction, appearance wise it is a light yellow to brown colour. We use the Prime grade of European Oak with fewer knots for unbeatable strength and maximum wow factor! Recommended fixings for Oak is Marine Grade Stainless Steel.
Can be stained, as with Idigbo avoid painting.
Approx weight guide 720 KG/M3

Get a quote on the Denbigh pedestrian gate

Want a made to measure Denbigh gate? If so then please use the form below to get in touch with us. If you prefer you can also speak to one of our joiners on 01745 362444* Denotes required fields
  • Our gates like to know where they will be going! Please leave us your Postcode or County if delivery is required.
  • Please include height and widths of your gate requirements
  • This field is for validation purposes and should be left unchanged.