St Asaph driveway gates

Shown in Idigbo (Hardwood), our St Asaph driveway gates are ideal if you want something similar to either our Caernarfon or Harlech gates but slightly ‘less fussy’ and more minimialist!

The St Asaph pair of gates shown has been customised by our customer, into an unequally split pair of driveway gates – one gate as a pedestrian sized gate and the other gate being larger to suit the remainder of the opening.

St Asaph driveway gates

Unequally split St Asaph pair of driveway gates.

Want the more usual 50/50 equally split gates? Not a problem, the St Asaph driveway gates can be customised to your requirements.

An open boarded version is also available along with a garden gate and a larger side access gate As with all our gates the St Asaph are also available manufactured to suit automation.

A matching pedestrian gate and garden gate is also manufactured.

St Asaph driveway gates - rear

The St Asaph drive gates from the rear, pictured in Idigbo (stained in a light oak stain)

Call Ted & The Team

For quality workmanship by time-served Joiners:

Call Ted & The Team on 01745 362444

or email a question to enquiries@woodworkersuk.co.uk


Get a price on the St Asaph gates

Want a bigger or smaller pair of gates than what is pictured?

Again no problem, as with every pair of driveway gates pictured on our website the St Asaph gates are made to suit your own driveway – however unusual the sizes, give us a call for a full personalised costing!

St Asaph top rail

Close up of the St Asaph head. You can also see the construction methods (through wedged morticed and tenon jointed frame) used.

St Asaph driveway gates – specifications

All top edges on any horizontal rails of the St Asaph feature an angled water run off, this stops the build up of moisture on your gates and makes for a longer lifespan. The stiles of the St Asaph (vertical outer uprights of the gate frame) also have rounded outer edges.

Available in the following five kiln dried timbers
Prime European Oak (Hardwood),
Accoya (Acetylated Softwood),
Idigbo (Hardwood),
Meranti (Hardwood),
Scandinavian Redwood (Softwood)

Automation – Can be automated, please contact us for details
Construction – Through wedged, morticed & tenoned jointed

Height – Made to measure
Width – Made to Measure
Stiles – 2 3/4″ x 2 3/4″ / 70mm x 70mm
Top rail/Head & Full thickness mid rails – 2 3/4″ x 2 3/4″ / 70mm x 70mm
Hidden rails (visible from rear only) – 2 3/4″ x 1 7/8″ / 70mm x 48mm
Boarding – 3 3/4″ x 5/8″ / 95mm x 15mm
Infill (top ‘open vision panel’ section)– 1 3/4″ x 3/4″ / 45mm x 18mm (with gaps of no more than 8″/200mm between uprights)

St Asaph Guide prices

The St Asaph guide prices are based on a pair of gates 6ft high x 6ft overall wide (1830mm high x 1830mm overall wide) equally split gates, these are NOT from prices, smaller gates will be more economical etc – contact us for a price! All prices are correct time of insertion and are EX VAT. Free delivery to most parts of the UK mainland is included – exclusions do apply, again please contact us.


Scandinavian Redwood – Softwood £490

We use Unsorted Scandinavian Redwood, despite it’s name it is sorted for smaller knot size and less of them for better strength. Creamy white to yellow in colour.
Can be painted or stained.
Approx weight guide 550 KG/M3


Meranti – Hardwood £794

Used as a Mahogany substitute. Can vary in colour from a pinky red to dark red colour.
Can be painted or stained.
Approx weight guide 550-710 KG/M3


Idigbo – Hardwood £970

A plain light brown timber which gives the Oak look but without the Oak price tag. As strong as English Oak. Also known in the trade as ‘poor mans oak’.
Can be stained, however avoid painting.
Approx weight guide 560 KG/M3


Accoya – Modified Softwood £1199

The most longer lasting timber on the market! Doesn’t absorb water so doesn’t rot, also as water is not absorbed then any movement within the timber is minimal! Ideal even for the most challenging enviroments. Timber is guaranteed for 50 years againts rot and decay. Recommended ironmongery and fixings for Accoya is Marine Grade Stainless Steel. Can be painted or stained.
We use Grade A1 Accoya specially sorted with few knots.
Approx weight guide 510KG/M3


European Oak – Hardwood £1605

Oak needs no introduction, appearance wise it is a light yellow to brown colour. We use the Prime grade of European Oak with fewer knots for unbeatable strength and maximum wow factor! Recommended fixings for Oak is Marine Grade Stainless Steel.
Can be stained, as with Idigbo avoid painting.
Approx weight guide 720 KG/M3

Get a quote on our st Asaph gates

Like our St Asaph driveway gates? For a full personalised costing please get in touch using the form below, alternatively you can also give us a call on 01745 362444*Denotes required field
  • Need delivery? Please leave the County/Post Code of the delivery address below
  • Please include height and width of gates required
  • This field is for validation purposes and should be left unchanged.