Beaumaris timber driveway gates
Back to >> Timber driveway gates
Our Beaumaris timber driveway gates will greatly enhance the kerb appeal of any property with their elegant rising serpentine style rising head.
The Beaumaris shown right is the fully boarded, high centre driveway pair in Meranti (Hardwood).Our Beaumaris gates feature a curved head which rises 6" (150mm) from the lower point (other rises can also be accomodated, please contact us). If you prefer then the Beaumaris can also be manufactured with the curve dropping to the centre (low centre, shown below right). An open boarded version of our Beaumaris driveway gate is also available. Below left is the rear view of our Beaumaris gate.
Each and every gate is made to measure by time served craftsmen, and are available in smooth planed European Oak, Meranti and Idigbo (Hardwoods) and Scandinavian Redwood (Softwood). Timber samples (opens in new window).
As we only manufacture the Beaumaris as pair of driveway gates, for a single pedestrian gate try either our Arched headed gate, Curved headed gate or Denbigh gate (for the Denbigh we would recommend having the height of the head of the gate to match either the lowest or highest point of the Beaumaris gates).
Beaumaris timber driveway gate specifications
Available in European Oak, Meranti & Idigbo (hardwoods) and Scandinavian Redwood (softwood)
Height - Made to measure, head rises by 6" (150mm) from the lowest point
Width - Made to measure
Stiles all Ex 3 " x 3 " (75mm x 75mm),
Top rails Ex 3 " x 3 " (75mm x 75mm),
Barefaced centre rails (only visible from rear of gate) EX 3" x 2 1/4" (75mm x 54mm)
T&G boarding all Ex 4" x 3/4 " (100mm x 19mm)
Wedged morticed and tenon jointed construction
Can be automated (Please contact us for details)
All sizes referred to as EX are sawn sizes, once planed the timber will generally finish at approx 1/4" (5mm) less,
i.e. EX 3" (75mm) would generally finish at approx 2 3/4" (70mm).
Need hinges, locks or gate dropbolts for your timber driveway gates?
Then please see our wooden gate ironmongery section for more information.
If you like any of our wooden driveway gates then please contact us with the sizes you require for a full personalised costing.
Back to >> Timber driveway gates
Home | Timber gates | Timber pedestrian gates | Timber estate gates | Timber garage doors
Bespoke wooden gates | How to measure | FAQ | Sitemap