Arris rail brackets
£1.46 – £2.71
Arris rail brackets in a choice of 4″ / 100mm, 220mm & 12″ / 300mm.
Arris rail brackets are used for fixing the horizontal members of wooden fences to the vertical posts.
The brackets eliminate the need for jointing the rails to the posts to give a strong and rigid support.
Manufactured from pre-galv steel.
Sold individually.
Description
Additional information
| Weight | N/A |
|---|---|
| Finish | Pre-Galv |
| Size | 100mm, 220mm, 300mm |
| Carrier | DPD |
Reviews (0)
Shipping & Delivery
Related products
Prikka Strip
The 'Prikka strip' can be fitted almost anywhere you want to stop intruders gaining access t your property, from tops of fence panels, gates, brickwork and pipes.
It is recommended that the prikka strip is fixed using nails or screws, however it can be glued if required (external quality butyl and solvent based sealants are about the best if gluing, be sure however to score the underside of the strip before glueing to give something for the adhesive to key into).
Strips should be fitted at least 6ft above ground level and the warning notice (included) must be displayed.
Can be cut to size, durable construction and UV protection. Recommended by Police.
4.0m No.1409 (45mm x 500mm) Prikka-Strip Intruder Excluder - 8 Piece Retail Pack inc Warning Notice
Perrypost Bolt Grip Fence Post Support To Drive With 600Mm Long Spike – 3″ X 3″
Drive in post supports are the most popular method of securing a fence post into the ground as no digging or concreting is required. With the post being set above ground this helps reduce and protect against rot and decay.
Securing the post into the support is simple too...tighten the nuts and you're done!
Available for 3" (75mm) square posts and in a choice of galvanised or brown.
- For 3" (75mm) posts
- Bolt grip to secure posts in place
- Post support is driven into ground - no digging or concreting
- 600mm (24") spike.
Perrypost Bolt Grip Fence Post Support Concrete In
If the ground is rocky or loose, then this is the support that should be used to get the job done! Pour concrete into the hole and set the support into place, ensuring it remains upright. Once the concrete is set you have an extremely secure support to fit your post into.
- For 3" (75mm) or 4" (100mm) square posts.
- Bolt grips to post to ensure secure fit.
- Available in galvanised or brown finish.
Fence Panel Fixing Clips
Used for fixing wooden fence panels to wooden fence posts.
The fence panel fixing clips are available in a choice of 4 sizes (33mm, 42mm, 46mm & 52mm) and two finishes (brown or pre-galv).
* 33mm version is only available in brown.
Usually screwed to both post and then fence panel.
No fixings included.
Perrypost Bolt Grip Fence Post Support To Drive With 750Mm Long Spike – 4″ X 4″
Drive in post supports are the most popular method of securing a fence post into the ground as no digging or concreting is required. With the post being set above ground this helps reduce and protect against rot and decay. The brown finish blends in with most gardens, making them more appealing. Securing the post into the support is simple too...tighten the nuts and you're done!
- For 4" (75mm) posts
- Bolt grip to secure posts in place
- Post support is driven into ground - no digging or concreting
- 750mm (36") spike.
Perrypost Fence Post Repair Spike
Replaces a damaged or rotten post set into a concrete base.
Used to repair damaged or rotten posts set into concrete bases directly. Use this repair spike instead of digging out the concrete! Simply cut off the existing damaged or rotten post at floor level and drive the spur into the wood that is set in the concrete and you have a secure fitting without the hard labour.
- Available for 3" (75mm) square posts.
- Bolt grips to post to ensure secure fit.
- Available in galvanised or brown finish.
Perrypost Bolt Grip Fence Post Support Bolt Down
Heavy-duty bolt down post support, ideal for use with wooden fence posts.
Suitable for flat, hard surfaces to fit your post to. Secured by four bolts (available separately) which fix into the concrete or slab. Once fitted, your post will be securely in place. As everything is above ground this product gives the best protection for your timber post against rot and decay.
Available in brown and galvanised and to suit 3" (75mm) square, 4" (100mm) square and 6" (150mm) square posts.
- Bolts down to concrete slab
- Bolt grip to secure posts in place
- Available for 3" (75mm), 4" (100mm) and 6" (150mm) timber posts
Reviews
There are no reviews yet.