Carpentry and Joinery Glossary A-Z

Explanation of terminology used in Joinery and Carpentry

We’ve put together a glossary of commonly used Carpentry & Joinery terms. Some of the terms have a couple of different meanings and some you will be familiar with and some maybe not so. Due to the sheer amount of Carpentry and Joinery terms, we will spread it over a couple of posts so we can include as many as possible.We begin with A-B

Continue reading

Basic Woodworking Joints

The main aim when jointing any pieces of timber together should be to cut the joints and arrange them so as to weaken the pieces of timber as little as possible. When the connection is effected entirely by means of timbers fitted together, it is called a joint. Most commonly, however, the joint is strengthened and secured by fastenings, such as: wedges, glue, draw pins, pins, screws, nails, etc. In nearly all cases simple joints are more effective than complicated joints.

Woodworking joints can be divided into three main classifications that correspond to their functions:
joints in length for increasing the lengths of timber, joints in width for increasing the width of timber and angle joints.

Continue reading

Treating Your Wooden Gates

Like all exterior joinery, our wooden gates and garage doors need protecting from the extremes of the British climate, if they are to last for many years. There are many types of treatments available from paints to stains and oils.

If you decide to oil your wooden gates or doors then be aware that you could end up having to regularly apply additional coats of oil every 2-3 months to keep the timber in tip-top condition.

Continue reading