Rising field gate hinge sets are ideal for uneven bumpy ground or driveways that rise and would otherwise stop your gates from opening, they can also be used to self close the gates.
Suitable for hanging the gates from a 3″ /75mm thick post (the rocker plate for the bottom hinge however requires a 150mm wide post), the rising hinge sets include all fixings.
Contents – 24″ /600mm top hinge 5″ / 125mm bottom hinge 13″ / 330mm Hook to bolt (for top hinge), Rocker plate (for bottom hinge), All fixings.
Additional information
Weight
12 kg
Finish
Hot Spelter Galvanised
Fixings included?
Fixings included
Hinge Type
Field Gate Hinges
Carrier
DPD
Brand
Eliza Tinsley
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “Rising Field Gate Hinge Sets” Cancel reply
TruClose Heavy-Duty Alignment Legs hinges deliver dependable TruClose reliability for pool safety and general-purpose gates around homes and yards, as well as high-traffic gates. These hinges are ideal for retrofitting existing gates as they will fit to gate gaps ranging from 1/4"- 1" (6-25mm).
Special Quick-Fit alignment legs are available as options on most TruClose models. They make aligning the hinge on the gate and fence post quick and easy, as well as adding extra strength due to the additional fixing points. Details - Tcs3 Dimensional Drawings 2.2013 [PDF]Details - Tcs3 Installation Instructions 12 11 12 [PDF]
For use on metal gates only
Unique, patented tension adjustment - Quick, easy and safe adjustment
Heavy-duty construction - Designed to last
No visible fasteners - Hides screws and enhances the look of your gate
Internal stainless steel spring closer - No need for unsightly external spring
Strong, molded polymer & stainless steel - Won't rust, bind, sag or stain
Limited lifetime warranty - Rigorous testing programs ensure our products are of the highest quality, enabling us to back them with a Limited lifetime warranty. If you have any problems, D&D will handle them personally.
Suitable for gates weighing up to 132lb (60kg). TruClose Heavy-Duty Multi-Adjust Hinges offer a large range of adjustability to make installation even easier!
They offer adjustable spring tension as well as 3/4" (19mm) gap adjustment, combined with up to 3/4" (19mm) horizontal and vertical adjustment.
Requires clearance gap (between gate and gate post) of between 16mm upto a max of 35mm
Multi-Adjust Hinges are suitable for use on vinyl and wood gates. Details - Instructions Truclose Multi Adjust [PDF]Details - Tchdma1 New Brackets 6 29 09 [PDF]
Heavy-duty construction - Designed to last
Unique, patented tension adjustment - Quick, easy and safe adjustment
Strong, moulded polymer & stainless steel -Won't rust, bind, sag or stain
Internal stainless steel spring closer - No need for unsightly external spring
Limited lifetime warranty - Rigorous testing programs ensure our products are of the highest quality, enabling us to back them with a Limited lifetime warranty. If you have any problems, D&D will handle them personally.
The TruClose Regular hinge range is suitable for gates weighing up to 66lb (30kg) with a maximum gate load up to 550lb/250kg. A number of options are available, including: adjustment up to 3/4" (19mm).
Suitable for timber and metal gates and requires a clearance gap (between gate and post) of 13/16" (21mm)
Alignment Legs - Provide quick install and added strength
Unique, patented tension adjustment from either end - Quick, easy and safe adjustment
No visible fasteners - Hides screws and enhances the look of your gate
Optional decorative trim covers - Stylish, contemporary appearance
Internal stainless steel spring closer - No need for unsightly external spring
Strong, molded polymer & stainless steel - Won't rust, bind, sag or stain
Limited lifetime warranty - Rigorous testing programs ensure our products are of the highest quality, enabling us to back them with a Limited lifetime warranty. If you have any problems, D&D will handle them personally.
300mm Curved rail hinge sets, available in a choice of hot spelter galvanised or black.
The curved rail hinge sets are ideal for gates with a curved top rail - either a rising curve (high centre) or dropping curve (low centre) - simply fit the top hinge whichever way is required.
Being a 'handed' hinge you will need to select either right handed or left handed. Left handed version would, when looking at the hinge attach to a post on the left hand side of the gates.
For a pair of gates then you will need both a right handed curve hinge set and a left handed curve hinge set.
Supplied with all fixings.
Available in both 18 inch and 24 inch versions, our stainless steel stright band and gudgeon hinges offer excellent corrision resitance being marine grade stainless steel.
Suitable for use with acidic timbers where corrision resitance is a must and ideal for coastal locations.
Being a straight hinge, if fitting on an outside face of a gate post or to a garage door frame then the hinge plate will need sinking into the post or door frame to allow the gates or doors to sit flush with the post/frame.
Supplied with all fixings.
Highly adjustable gate hinges for metal gates.
You won't settle for just any hinge on your gate when you know can have the best. Turn to TruClose and you'll always look at your fence with peace of mind. TruClose gives you self-closing action, along with dual adjustability for gate weight and closing speed.
Suitable for gates weighing up to 55 lb. (25 kg.), Mini Multi offers a large range of adjustability to make installation even easier!
With up to 1 1/8" (35mm) of horizontal adjustment and 3/4" (19mm) of vertical adjustment, they are suitable for installation on any type of gate material.
Requires gate clearance (between gate and post) of 29mm and for use on square frame gates and posts.
Alignment Legs - Provide quick install and added strength
Unique, patented tension adjustment from either end - Quick, easy and safe adjustment
No visible fasteners - Hides screws and enhances the look of your gate
Optional decorative trim covers - Stylish, contemporary appearance
Internal stainless steel spring closer - No need for unsightly external spring
Strong, molded polymer & stainless steel - Won't rust, bind, sag or stain
Limited lifetime warranty - Rigorous testing programs ensure our products are of the highest quality, enabling us to back them with a Limited lifetime warranty. If you have any problems, D&D will handle them personally.
Commonly found on field gates, the field gate hinge sets when fitted with the hinge plates within the gate opening (rather than the front or rear of the gate posts) can allow the gates to open both in and out. Hinges wraparound both gates hence the alternate name of wraparound hinges.
Sizing refers to the top hinge only, bottom hinge is a standard size of approx 150mm to hinge pin centre.
Sold per set (enough for one gate) and supplied with all fixings for a typical installation.
Supplied with all screws & bolts
Suitable for gates 3" / 75mm thick.
Reviews
There are no reviews yet.