Showing 1–12 of 64 results

Brenton Padbolts

Brenton Padbolt available in a black, galvanised, black on galvanised or Stainless steel finish. Four sizes of 6"/150mm, 8"/200mm, 10"/250mm and 12"/300mm. Fixings can be supplied as an optional extra.

Field Gate Spring Fastener Set

Field gate spring fastener set for single gates, cannot be used in conjunction with a pair of gates Each Set consists of : 1 x Spring Latch, 1 x Double legged receiver/keep and 1 x Fabricated Staple Catch, complete with fixings. Made to suit 3" / 75mm thick Gates. Available in a choice of hot spelter galvanised or a black powder coated finish.

Fieldgate Bands with Straight Eye on Corner

Field gate bands with straight eye on corner. Available in a 125mm / 5" & 600mm / 24" version, both versions hot spleter galv. Suits 19mm hinge pins & a 75mm/3" thick gate. Sold individually.

Heavy Swivel Locking Bars

Swivel locking bars available in a choice of hot spleter galv or black finishes. Used as an alternative to a hasp and staple. Padlock not suppplied.

Lakeland Thumb Latch Set Antique Black

Lakeland Thumb Latch Set from Perry's Old Hill range of Antique ironmongery. Finished in a UV resistant black over a mallable iron body, the latch like all Old Hill items is salt spray tested to over 700 hours for a tough durable thumblatch. Supplied with all fixings. Size:185mm handle, 220mm latch bolt.

Perry 300mm Curved rail hinge sets

300mm Curved rail hinge sets, available in a choice of hot spelter galvanised or black. The curved rail hinge sets are ideal for gates with a curved top rail - either a rising curve (high centre) or dropping curve (low centre) - simply fit the top hinge whichever way is required. Being a 'handed' hinge you will need to select either right handed or left handed. Left handed version would, when looking at the hinge attach to a post on the left hand side of the gates. For a pair of gates then you will need both a right handed curve hinge set and a left handed curve hinge set. Supplied with all fixings.

Perry Antique Ring Door Knocker

Supplied with all fixings (threaded bolts with antique type stud ends)

Perry Auto Locking Pig Bolt

150mm / 6" Auto locking pig bolt. This automatic locking bolt when fitted with the bottom guard prevents opening by animals.

Perry Chain Hook On Plate

Holds chain or rope securely. 50mm x 50mm (2 inch square) plate. Available in six coloured finishes Supplied with all fixings (BZP screws, not coloured)

Perry Colourful Saddle Trolley

With a bridle hook and saddle rack, this Tack Trolley from Perry Equestrian is great for moving tack and equipment around the stables. Available in Black, Blue, Red, Pink

Perry Double Locking Long Throw Gate Locks (Key Lockable From Both Sides)

Key lockable/unlockable from front & rear of the gates - supplied with 5 keys Available in two sizes – for gates (and doors) upto 50mm thick and gates and (doors) upto 70mm thick Keyed alike – Choose this option if you want multiple locks with the keys interchangeable between locks 28mm spade drill bit as optional extra - used to drill the barrel of the lock.

Perry Field Gate Hinge Sets (Bottom Hinge Adjustable) on 4″ Square Plates Galvanised

Commonly found on field gates, the field gate hinge sets when fitted with the hinge plates within the gate opening (rather than the front or rear of the gate posts) can allow the gates to open both in and out. Hinges wraparound both gates hence the alternate name of wraparound hinges. Sizing refers to the top hinge only, bottom hinge is supplied in two pieces that clamps around bottom stile of gate and allows for adjustment by way of a threaded bolt. Suitable for gates 3" / 75mm thick. Sold per set (enough for one gate) and supplied with all fixings for a typical installation.