Showing 1–12 of 150 results

Open-boarded Deganwy Gate in Meranti

£0.00
Based on a through wedged morticed and tenon jointed frame. Manufactured in Meranti (Hardwood) which can be either painted or stained. If staining then a Mahogany stain is recommended. Can be either hinged or the left or right hand side (braced both ways!). Height = 790mm / 31” to the top of the joggles (pointy bits!) Width = 760mm / 28 ¾” wide Thickness = 70mm / 2 3/4” Timber specs - Stiles,Top rail, centre rail 70mm x 70mm Barefaced rails (seen from rear only) 70mm x 48mm

Conway-style Doors Scandinavian Redwood

£0.00
Manufactured on a through wedged morticed and tenon jointed frame in preservative treated (straw coloured) Scandinavian Redwood (Unsorted Softwood) and ready for painting or staining. Based on our Conway garage doors but with a barefaced bottom rail (seen from the rear only) rather than our usual full thickness bottom rail – ideal if you need to trim to suit an uneven floor as you can take upto 100mm / 4” without affecting the strength of the doors. The doors are rebated on the meeting stiles, so do overlap each other when closed. The Conway comprise six openings for glazing per door which are already pre-beaded from the inside – simply pull the beads out and insert your own glazing. Depending on your installation the doors can open in or out. From the outside (assuming the doors open out) then the right hand door opens first. Height = 2155mm Overall width (Both doors combined) = 2122mm wide Leaf size (each door) = 1067mm wide Openings for glazing = 12 in total (6 per door) each being approx 332mm high x 293mm wide Thickness – 45mm Timber sections - Stiles/Head/Transome – 95mm x 45mm Barefaced rails – 95mm x 23mm Glazing bars – 45mm x 45mm We do not supply the glazing with our doors. No garage door frame is included, if a door frame is required then please contact us for more info and prices. Can be collected from our workshops or delivery can be arranged - if collecting then please give us a call so we can put the doors to one side for you. Shipping & Delivery: This item comes with Free UK delivery and is usually despatched within 2-3 days.

Fence Panel Fixing Clips

£0.70£1.25
Used for fixing wooden fence panels to wooden fence posts. The fence panel fixing clips are available in a choice of 4 sizes (33mm, 42mm, 46mm & 52mm)  and two finishes (brown or pre-galv). * 33mm version is only available in brown. Usually screwed to both post and then fence panel. No fixings included.

Arris rail brackets

£1.46£2.71
Arris rail brackets in a choice of 4" / 100mm, 220mm & 12" / 300mm. Arris rail brackets are used for fixing the horizontal members of wooden fences to the vertical posts. The brackets eliminate the need for jointing the rails to the posts to give a strong and rigid support. Manufactured from pre-galv steel. Sold individually.

Enclosed Tower Bolts

£1.52£7.79
Enclosed tower bolts, available in a choice or black or galv finish. Supplied with staple style receiver. Fixings (screws) are also available as an optional extra if required. Not lockable with a padlock.

Perry Shield Grade CE7 Certifire Fire Door Butt Hinge with Spun Pin

£1.54£2.83
Fire rated hinges are important to achieve integrity of a fire door. The recommendation is a minimum of 3 hinges are used when installing a fire door, with the grade of hinge dictated by the weight of the fire door being fitted. Grade CE7 Certifire Suits FD30/60 75mm or 100mm Spun Pin Screws not supplied

Gate hooks to weld

£1.56£2.66
The metal gate hooks to weld are available in two versions - Straight ends & radius ends. Straight end gate hooks to weld are for welding to square/flat section gate posts. Radius end gate hooks to weld are for welding to round gate posts. Both versions are self colour steel with a 19mm pin. Supplied individually, so if a pair is required two must be ordered.

Birkdale Wire Cabin Hook Black

£1.97
150mm / 6" Long wire cabin hook in an Epoxy black finish. Usually used on sheds and lightweight gates to hold them open or to keep them closed.

Perry Key Blank For Long Throw Gate Locks

£1.99
Spare 6 Pin key blank to suit all Perry long throw locks. Will need cutting at a locksmiths' to suit your existing keys. Sold individually.

Perry Shield Grade CE7 Certifire Fire Door Butt Hinge with Button Tip Pin

£2.16£3.60

Perry Shield Grade CE7 Certifire Fire Door Butt Hinge with Button Tip Pin

Essential to ensuring there is no compromise to fire door integrity in an emergency, hinges must comply to annex B of BS EN 1935. The all-new Perry Shield range of fire door hinges are CE marked and CERTIFIRE Rated, and are available with a fire rating of either 30, 60 or 120 minutes. Fire rated hinges are important to achieve integrity of a fire door. The recommendation is a minimum of 3 hinges are used when installing a fire door, with the grade of hinge dictated by the weight of the fire door being fitted.

Grade CE7 Certifire Suits FD30/60/120 75mm or 100mm Button Tip Pin Available in Electro Brass, Polished Chrome and a Black finish Not supplied with screws

Auto Gate Catches

£2.30£16.78
Auto gate catches available in a choice of medium duty and heavy duty. Can be locked with a small padlock (not supplied). Available in black, galvanised and marine grade stainless steel finishes.

ERA Brass 189-32 tubular mortice latch 76mm case 57mm backset

£2.77
ERA Brass 189-32 Tubular mortice latch suitable for internal doors, for use where no locking is required. Suitable for doors 35-44mm thick Can be used with either lever or knob handles. 76mm case, 57mm backset. Also available in Satin Zinc finish