Showing 1–12 of 156 results

125mm Field gate double strap bottom band galvanised

Bottom field gate hinge in a hot spelter galvanised finish. 125mm long x 50mm wide x 6mm thick suiting a 3 inch / 75mm thick gate. The bottom field gate hinge takes a 19mm hinge pin. Supplied individually without fixings, so if a pair are required then you will need to order two.

19mm hinge pin on 100mm square plate

19mm / 3/4 inch hing pin on a 100mm (4 inch) square plate. Suits any hinge that takes a 19mm pin. Suitable for use with our field gate hinges. Can be screwed or bolted to your wall or fence post, fixings not supplied. Supplied individually, so if a pair are required then you will need to order two.

Adjustable bottom field gate hinges 19mm pin bzp

Adjustable bottom field gate hinge in a BZP finish. Hinge clamps to to bottom of gate stile and allows adjustment by way of moving position of bolts on threaded bar. Suits a 75mm / 3 inch thick gate. Takes a 19mm pin, overall length of hinge is 10" / 250mm.

Adjustable Hook & Band Gate Hinges

A heavy duty adjustable hook and band gate hinge used on timber gates, side hinged garage doors and external doors. Contents -
  • 1 pair of Adjustable Bands
  • 1 pair of 100mm Precision Eyebolts
  • 1 pair of Hook on Plates to suit Adjustable Bands
  • All fixings
Priced in pairs (i.e. 2 Hinges), if 1.5 Pair (i.e. 3 hinges) are required then this can be selected in the quantity box below.

Adjustable Hook on 4″ x 4″ Plate

19mm ( 3/4") hook on a 100mm x 100mm (4" x 4") square plate. Sold individually, so if a pair are required then two will have to be selected. Commonly used with field gate hinges. Hot spelter galvanised finish.

Antique Door Studs

Give your gate or door a Georgian style makeover with these antique style door studs. Simply screw into a pre-drilled hole. The door studs are 20mm square with a projection of 15mm with 14mm of screw thread within the door. Each pack contains 10 black powder coated antique door studs

Arris rail brackets

Arris rail brackets in a choice of 4" / 100mm, 220mm & 12" / 300mm. Arris rail brackets are used for fixing the horizontal members of wooden fences to the vertical posts. The brackets eliminate the need for jointing the rails to the posts to give a strong and rigid support. Manufactured from pre-galv steel. Sold individually.

Auto Gate Catches

Auto gate catches available in a choice of medium duty and heavy duty. Can be locked with a small padlock (not supplied). Available in black, galvanised and marine grade stainless steel finishes.

Birkdale Strong Tee Hinges – Black on Galvanised (Pair)

Recommended for lighter gates or doors that are no more than 20kg. Although the Tee hinges we supply are a strong version of the classic tee hinge these do lack some of the strength of the cranked band and gudgeon or adjustable hinges.

Birkdale Wire Cabin Hook Black

150mm / 6" Long wire cabin hook in an Epoxy black finish. Usually used on sheds and lightweight gates to hold them open or to keep them closed.

Bow Handle Bolts – Black or Galvanised finish

Perrys bow handle bolts available in a black or galvanised finish. Available in a range of sizes: 12" / 300mm, 15" / 375mm, 18" / 450mm & 24" / 600mm Supplied with BZP flat plate and galv staple receivers. Fixings are available as an optional extra.

Brenton Padbolts

Brenton Padbolt available in a black, galvanised, black on galvanised or Stainless steel finish. Four sizes of 6"/150mm, 8"/200mm, 10"/250mm and 12"/300mm. Fixings can be supplied as an optional extra.