Showing 1–12 of 19 results

Adjustable Hook & Band Gate Hinges

£17.00£199.20
A heavy duty adjustable hook and band gate hinge used on timber gates, side hinged garage doors and external doors. Contents -
  • 1 pair of Adjustable Bands
  • 1 pair of 100mm Precision Eyebolts
  • 1 pair of Hook on Plates to suit Adjustable Bands
  • All fixings
Priced in pairs (i.e. 2 Hinges), if 1.5 Pair (i.e. 3 hinges) are required then this can be selected in the quantity box below.

Cranked Band And Gudgeon Hinges

£11.11£180.35
A two piece gate hinge comprising a hin pin on plate and band or strap that sits over the pin. Available in Powder coated black, Galvanised,  Black on Galvanised (double the protection!) and Marine Grade Stainless Steel (Grade A4/316) finish. Fixings are supplied as standard with the black on galvanised and Stainless Steel hinges but are an optional extra for the black and galvanised options. Priced in pairs (i.e. 2 Hinges), if 1.5 Pair (i.e. 3 hinges) are required then this can be selected in the quantity box below.

Garage Door Ironmongery Pack (Galvanised)

From: £34.65
Garage Door Ironmongery Pack in Galvanised finish.

Choosing Hinges

First choose your hinges and select how many pairs of hinges are required default is one pair of hinges (i.e two hinges which is enough for one door, for a pair of doors two pair of hinges are required. For doors over 2130mm high, a third hinge should be added. The length of a hinge is denoted by door width - for normal domestic use the hinges should be 1/3 (one third) of the width of the each door. For industrial or heavy domestic use then hinges should be 1/2 (half) of the width of the door.

Dropbolt #1

The dropbolt secures the secondary door to the floor.

Bow Handle or Monkey Tail Bolt

The Bow Handle Bolt or Monkey Tail Bolt secures the secondary door to the frame.

Locks

Choose your favoured method of locking the doors, using either a Sashlock, Deadlock or Padbolt.

Garage Door Ironmongery Pack (Black on Galvanised)

From: £96.57
Garage Door Ironmongery Pack in Premium Black, suitable for wooden garage doors.

Choosing Hinges

First choose your hinges and select how many pairs of hinges are required - default is one pair of hinges (i.e two hinges which is enough for one door, for a pair of doors two pair of hinges are required. For doors over 2130mm high, a third hinge should be added. The length of a hinge is denoted by door width - for normal domestic use the hinges should be 1/3 (one third) of the width of the each door. For industrial or heavy domestic use then hinges should be 1/2 (half) of the width of the door.

Dropbolt #1

The dropbolt secures the secondary door to the floor.

Dropbolt #2

Bow handle bolts aren't available in Premium Black, so a Dropbolt is used in its place. The Dropbolt is used to secure the secondary door to the frame.

Locks

Choose your favoured method of locking the doors, using either a Sashlock, Deadlock or Padbolt.

Driveway Gate Ironmongery Pack (Black)

From: £36.78
Driveway Gate Ironmongery Pack in Black, suitable for driveway gates. The Dropbolt options include a Black Dropbolt or Galvanised Lockable Dropbolt, as there is no Lockable version available in Black.

Choosing Hinges

First choose your hinges. For gates over 2130mm high, a third hinge should be added. The length of a hinge is denoted by gate width - for normal domestic use the hinges should be 1/3 (one third) of the width of the each gate. For industrial or heavy domestic use then hinges should be 1/2 (half) of the width of the gate.

Dropbolt

The dropbolt secures the secondary gate to the floor.

Driveway Gate Ironmongery Pack (Black on Galvanised)

From: £89.61
Ironmongery Pack in Premium Black, suitable for driveway gates. The Dropbolt options include a Premium Black Dropbolt or Galvanised Lockable Dropbolt, as there is no Lockable version available in Premium Black.

Choosing Hinges

First choose your hinges. For gates over 2130mm high, a third hinge should be added. The length of a hinge is denoted by gate width - for normal domestic use the hinges should be 1/3 (one third) of the width of the each gate. For industrial or heavy domestic use then hinges should be 1/2 (half) of the width of the gate.

Dropbolt

The dropbolt secures the secondary gate to the floor.

Perry Straight Band & Gudgeon Hinges – Stainless Steel (Pair)

£123.11£156.35
Available in both 18 inch and 24 inch versions, our stainless steel stright band and gudgeon hinges offer excellent corrision resitance being marine grade stainless steel. Suitable for use with acidic timbers where corrision resitance is a must and ideal for coastal locations. Being a straight hinge, if fitting on an outside face of a gate post or to a garage door frame then the hinge plate will need sinking into the post or door frame to allow the gates or doors to sit flush with the post/frame. Supplied with all fixings.

Pedestrian/Side Access Gate Ironmongery Pack (Stainless Steel)

From: £172.74
Pedestrian/Side Access Gate Ironmongery Pack in Stainless Steel, for pedestrian/side access gates in Accoya & Oak and others timbers that contain tannic acid which otherwise can corrode non-ferrous ironmongery. Also ideal for coastal locations!

Choosing Hinges

First choose your hinges. The length of a hinge is denoted by gate width - for normal domestic use the hinges should be 1/3 (one third) of the width of the each gate. For industrial or heavy domestic use then hinges should be 1/2 (half) of the width of the gate.

Pedestrian/Side Access Gate Ironmongery Pack (Black on Galvanised)

From: £40.64
Ironmongery Pack in Galvanised finish, for pedestrian/side access gates

Choosing Hinges

First choose your hinges. The length of a hinge is denoted by gate width - for normal domestic use the hinges should be 1/3 (one third) of the width of the each gate. For industrial or heavy domestic use then hinges should be 1/2 (half) of the width of the gate.

Locks

Choose your favoured method of locking the gates, using either a Sashlock, Deadlock, Padbolt or Gatemate lock.

Curved Headed Gate (high centre)

£315.60
Based on a through wedged morticed and tenon jointed frame. Manufactured in Idigbo (Hardwood) which can stained. Idigbo is also known as poor man's Oak and is a light oak colour so an Oak pigmented stain is ideal! Can be either hinged or the left or right hand side (braced both ways!). Height = 915mm/ 36” to the top of the joggles (pointy bits!) Width = 762mm / 30” Thickness = 70mm / 2 3/4” Curve rises (or falls!) by 70mm / 2 3/4” Timber sections - Stiles/Heads 70mm x 70mm Barefaced rails (seen from rear only) 70mm x 48mm Shipping & Delivery: This item comes with Free UK Mainland delivery. Please click here to see delivery charges for certain regions including Highlands, Islands and Northern Ireland. Please also select the number of fixing stiles you require.

Denbigh Gate Prime European Oak

£424.80
Based on a through wedged morticed and tenon jointed frame. Manufactured in Prime European Oak (Hardwood) which can be stained. For best results an Oak coloured stain can be used. Recommended ironmongery for Oak is Marine grade stainless steel (grade A4 / 316), with other ironmongery you risk the tannic acid (present in Oak and which is what makes it so weather resistant) reacting with the ironmongery – this can result in blue/black staining as the ironwork corrodes! Can be either hinged or the left or right hand side (braced both ways!). Height = 980mm / 38 1/2” to the top of the joggles (pointy bits!) Height to top of top rail = 915mm / 36” Width = 915mm / 36” Thickness = 70mm / 2 3/4” Head rises by 70mm / 2 3/4” Timber specs - Stiles,Top rail 70mm x 70mm Barefaced rails (seen from rear only) 70mm x 48mm Can be collected from our workshops or delivery can be arranged. Usually despatched within 2-3 days. Shipping & Delivery: This item comes with Free UK Mainland delivery. Please click here to see delivery charges for certain regions including Highlands, Islands and Northern Ireland. Please also select the number of fixing stiles you require.

Driveway Gate Ironmongery Pack (Stainless Steel)

From: £362.84
Ironmongery Pack in Stainless Steel, suitable for driveway gates.

Choosing Hinges

For gates over 2130mm high, a third hinge should be added. The length of a hinge is denoted by gate width - for normal domestic use the hinges should be 1/3 (one third) of the width of the each gate. For industrial or heavy domestic use then hinges should be 1/2 (half) of the width of the gate.

Dropbolt

The dropbolt secures the secondary gate to the floor.