Showing 1–12 of 81 results

Adjustable Hook & Band Gate Hinges

£17.00£199.20
A heavy duty adjustable hook and band gate hinge used on timber gates, side hinged garage doors and external doors. Contents -
  • 1 pair of Adjustable Bands
  • 1 pair of 100mm Precision Eyebolts
  • 1 pair of Hook on Plates to suit Adjustable Bands
  • All fixings
Priced in pairs (i.e. 2 Hinges), if 1.5 Pair (i.e. 3 hinges) are required then this can be selected in the quantity box below.

Cranked Band And Gudgeon Hinges

£11.11£180.35
A two piece gate hinge comprising a hin pin on plate and band or strap that sits over the pin. Available in Powder coated black, Galvanised,  Black on Galvanised (double the protection!) and Marine Grade Stainless Steel (Grade A4/316) finish. Fixings are supplied as standard with the black on galvanised and Stainless Steel hinges but are an optional extra for the black and galvanised options. Priced in pairs (i.e. 2 Hinges), if 1.5 Pair (i.e. 3 hinges) are required then this can be selected in the quantity box below.

Heavy Duty Reversible Gate Hinges

£13.80£66.24
Heavy duty reversible gate hinges in a choice of black, galvanised or black on galvanised finish. Each pair comes with four hinge cups (two per hinge) Priced in pairs (i.e. 2 Hinges), if 1.5 Pair (i.e. 3 hinges) are required then this can be selected in the quantity box below.

Garage Door Drop Bolts

£10.61£59.99
Surface mounted garage door drop bolt usually fitted to the bottom of external doors, garage doors and gates. Available in a choice of black powder coated, galvanised, black on galvanised and marina grade stainless steel. Supplied with receiver plate, tubular receiver and all fixings.

Brenton Padbolts

£3.13£35.21
Brenton Padbolt available in a black, galvanised, black on galvanised or Stainless steel finish. Four sizes of 6"/150mm, 8"/200mm, 10"/250mm and 12"/300mm. Fixings can be supplied as an optional extra.

Perry Double Locking Long Throw Gate Locks (Key Lockable From Both Sides)

£33.64£37.73
Key lockable/unlockable from front & rear of the gates - supplied with 5 keys Available in two sizes – for gates (and doors) upto 50mm thick and gates and (doors) upto 70mm thick Keyed alike – Choose this option if you want multiple locks with the keys interchangeable between locks 28mm spade drill bit as optional extra - used to drill the barrel of the lock.

Perry Single Locking Long Throw Gate Locks (Key Lockable One Side, Latch Bolt Other Side)

£31.32£35.14
Key lockable/unlockable from front - supplied with 5 keys, unlocks from rear via thumblatch Available in two sizes - for gates (and doors) upto 50mm thick and gates and (doors) upto 70mm thick Keyed alike available - Choose this option if you want multiple locks with the keys interchangeable between locks 28mm spade drill bit as optional extra to drill for the barrel

Plain Ring Gate Latches

£6.95£42.64
Plain handled ring gate latch in a black, galvanised, black on galvanised or satin marine grade stainless steel finish. Available in three sizes of 125mm/5", 150mm/6" and 175mm/7". All ringlatches feature a rose of 58mm diameter. Fixings (screws) available as an optional extra for the black and galvanised latches. Both the black on galvanised and stainless steel come with fixings as standard.

Senior Reliance Garage Door Holders (Cord Operated)

£37.56
If you’ve ever tried to garage your vehicle on a windy day you run the risk of the doors slamming on you as you attempt to drive in, then you need garage door holders! Simply fit to the top of the doors and then the top of the frame/lintel. To operate,  open the doors to 90 degrees and the doors will then lock in place enabling you to drive into your garage without the risk of the doors slamming shut on your car. To close the doors, simply pull the cord and push the doors closed – easy! There are two versions of the garage door holders available: Narrow stile which are the most commonly used or a Wide lintel variety. Garage Door Holders come with all fixings and fitting instructions and are supplied in pairs (enough for one pair of garage doors) Please note that the garage door holders will not work on timber framed garages where you have an angled corner brace between the top of the door frame and vertical upright (side) of the door frame. In some cases these corner braces are decorative and can be removed but if in any doubt you would need to take professional advice. Please see the specification drawing to find out which is suitable for you.

Gatemate Shed Locking Bar

£29.99£47.99
Bolts to the outside of externally opening doors and via the use of a padlock (not supplied) prohibits the door from being opened. Comprises two brackets that bolt on to either side of door opening, then it is simply a case of inserting bar and locking the end with a padlock. Available in two sizes of 1000mm and 1800mm and comes complete with fixings.

Heavy Duty Ornamental Twisted Ring Gate Latches

£31.84£45.14
The larger versions of our Twisted handle ring gate latches, which makes for a decorative latch for any gate or door. The ring latch comprises the twisted ring handle, twisted ring latch handle, keep, receiver and 100mm spindle bar. Supplied with all fixings and comes in three finishes and two sizes:
  • 200ml/8"
  • 250ml/10"

Lockable Drop Bolt

£21.77£77.93
375mm/15", 450mm / 18" and 600mm /24" Lockable dropbolt in a galvanised finish or Marine Grade Stainless Steel finish * Marine Grade Stainless Steel is only available in an 18"/450mm version. Supplied with all fixings for a standard installation.