Showing 1–12 of 65 results

Abu14126C Integral Van Lock White 141/200 + 26/70 With 70Mm Series 26 Diskus Padlock

£59.17
141 Series Diskus Intergral Van Lock, convenient one handed key operation to lock & unlock with multi-purpose Hasp and Staple for all round protection. Supplied complete with the 'Original' Diskus 26/70 padlock, whose strong steel construction gives maximum protection. Suitable for vans, trucks, garages, sheds or any outward opening double doors.

Abus Expandable Window Grille

£58.94£103.56
The Abus Expandable Window Grille range offers protection against basement and ground floor window break-ins. A single window as small as 500 x 300mm can be protected, multiple units can be installed to cover a range of window sizes. They provide a quick, easy secure solution especially post burglary attempts or breaks ins, providing peace of mind and security. The grilles have a thick passivated coating that is highly resistant to corrosion and can be painted if desired. They are easy to install and come with all the required security screws and fixings. Available in the following sizes -
  • 500-650mm x 450mm
  • 700-1050mm x 450mm
  • 700-1050mm x 600mm

Adjustable Hook & Band Gate Hinges

£17.00£199.20
A heavy duty adjustable hook and band gate hinge used on timber gates, side hinged garage doors and external doors. Contents -
  • 1 pair of Adjustable Bands
  • 1 pair of 100mm Precision Eyebolts
  • 1 pair of Hook on Plates to suit Adjustable Bands
  • All fixings
Priced in pairs (i.e. 2 Hinges), if 1.5 Pair (i.e. 3 hinges) are required then this can be selected in the quantity box below.

Birkdale Gate Stop Box Heavy Duty 75mm/3″ – Black

£46.34
The Heavy Duty Gate Stop Box is used to restrict either the opening or closing of a gate and usually concreted in to the driveway. To use simply lift the hinged stop into place. When not required folds flat.

Cranked Band And Gudgeon Hinges

£11.11£180.35
A two piece gate hinge comprising a hin pin on plate and band or strap that sits over the pin. Available in Powder coated black, Galvanised,  Black on Galvanised (double the protection!) and Marine Grade Stainless Steel (Grade A4/316) finish. Fixings are supplied as standard with the black on galvanised and Stainless Steel hinges but are an optional extra for the black and galvanised options. Priced in pairs (i.e. 2 Hinges), if 1.5 Pair (i.e. 3 hinges) are required then this can be selected in the quantity box below.

Curved Headed Gate (high centre)

£315.60
Based on a through wedged morticed and tenon jointed frame. Manufactured in Idigbo (Hardwood) which can stained. Idigbo is also known as poor man's Oak and is a light oak colour so an Oak pigmented stain is ideal! Can be either hinged or the left or right hand side (braced both ways!). Height = 915mm/ 36” to the top of the joggles (pointy bits!) Width = 762mm / 30” Thickness = 70mm / 2 3/4” Curve rises (or falls!) by 70mm / 2 3/4” Timber sections - Stiles/Heads 70mm x 70mm Barefaced rails (seen from rear only) 70mm x 48mm Shipping & Delivery: This item comes with Free UK Mainland delivery. Please click here to see delivery charges for certain regions including Highlands, Islands and Northern Ireland. Please also select the number of fixing stiles you require.

Curved Headed Gate (low centre)

£315.60
Based on a through wedged morticed and tenon jointed frame. Manufactured in Idigbo (Hardwood) which can stained. Idigbo is also known as poor man's Oak and is a light oak colour so an Oak pigmented stain is ideal! Can be either hinged or the left or right hand side (braced both ways!). Height = 915mm/ 36” to the top of the joggles (pointy bits!) Width = 762mm / 30” Thickness = 70mm / 2 3/4” Curve rises (or falls!) by 70mm / 2 3/4” Timber sections - Stiles/Heads 70mm x 70mm Barefaced rails (seen from rear only) 70mm x 48mm

D&D Lokkbolt

£89.99£109.69
Supplied with all fixings and available in 18" and 24" versions and to suit metal gates and vinyl/timber gates. Manufactured from Marine Grade Stainless Steel & black polymer. Key lockable (no padlock required). Optional base plate is also available as an additional extra.

D&D Lokklatch Deluxe

£79.44
The LokkLatch Deluxe is a high quality security and privacy gate latch for general-purpose gates. Special, longer side-fixing legs on this model provide extra strength and easy fitting alignment. The LokkLatch Deluxe with strong, molded polymer construction with stainless steel components, takes an innovative approach to the gravity latch principle and combines the unique benefits of key-lockability and reliable latching action with superior design and rust-proof components. The External Push-Button Access allows the gate to be opened and locked from either side of the fence. The LokkLatch Deluxe also offers a high degree of versatility, as it is adjustable both vertically and horizontally to ensure proper fit and reliable operation. This latch suits all square post gate (up to 6" / 150mm) and fencing materials as well as left or right hinged gates for easy installation. Requires a clearance gap (between gate and post or gate and gate) of 16-38mm and will fit posts of upto 150mm / 6". Suitable for wooden, vinyl and metal gates Details - Lokklatch Deluxe Fitting Intructions [PDF]
  • Vertically & horizontally adjustable
  • Tested to over 200,000 closures
  • Fits upto 150mm / 6" posts
  • Fitting jig included
  • Fits metal, vinyl and wooden gates
  • Limited lifetime warranty
Usually despatched within 2-3 days

D&D Lokklatch Magnetic

£117.26£128.78
Lokklatch Magnetic by D&D with Lifetime Warranty. Operates & locks from either side of gate & can be fitted on single or pairs of gates. Can fit to gates from 38mm ( 1 1/2") to 150mm (6") thick. Requires 19mm clearances between gate & post/gate. Available in a choice of three trim finishes - black, chrome or brushed stainless steel. Black trim version also available as keyed alike lock.

D&D Lokklatch Pro-Sl Self Locking Latch

£93.98
  • Self-locking operation requires a key to enter & exit
  • Operates & locks from both sides of the gate
  • Re-keyable, 6-pin security locks
  • Strong & 100% rust proof
  • Fully adjustable
  • Quick & easy install
  • Fitting jig included - cuts installation time in half
  • For wooden & metal gates
  • Requires clearance gap of between 1/2" and 1 1/2"
  • Limited lifetime warranty

D&D Lokklatch Series 2

£36.42£55.12
The D&D Lokklatch Series 2 is suitable for metal, vinyl & timber gates and supplied with three wafer style keys. Select the 'external access kit' option if you want to be able to operate from both sides of gate. Minimum post size: 25mm / 1" Ideal clearance gap: 19mm / 3/4" * Only suitable for square posts/gate frames (i.e. not rounded posts or frames).