Rising Field Gate Hinge Sets

£79.69
Rising field gate hinge sets are ideal for uneven bumpy ground or driveways that rise and would otherwise stop your gates from opening. Suitable for hanging the gates from a 3" /75mm post, the rising hinge sets include all fixings. Available in one size of a 24"/600mm top hinge and in a galvanised finish only.

Adjustable bottom field gate hinges 19mm pin bzp

£11.88
Adjustable bottom field gate hinge in a BZP finish. Hinge clamps to to bottom of gate stile and allows adjustment by way of moving position of bolts on threaded bar. Suits a 75mm / 3 inch thick gate. Takes a 19mm pin, overall length of hinge is 10" / 250mm.

125mm Field gate double strap bottom band galvanised

£10.73
Bottom field gate hinge in a hot spelter galvanised finish. 125mm long x 50mm wide x 6mm thick suiting a 3 inch / 75mm thick gate. The bottom field gate hinge takes a 19mm hinge pin. Supplied individually without fixings, so if a pair are required then you will need to order two.

Field gate double strap band top hinge

£16.39£20.17
Top field gate hinges available in a 12 inch (300mm), 18 inch (450mm) and 24 inch (600mm) options. 50mm wide x 6mm thick, to suit a 3inch / 75mm thick gate and a 19mm hinge pin. Supplied individually without fixings, so if a pair are required then you will need to order two. Available in black & galvanised finish. *Black only available in 24"

Perry Field Gate Hinge Sets on 4″ x 4″ Plates Galvanised

£25.22£28.68
Commonly found on field gates, the field gate hinge sets when fitted with the hinge plates within the gate opening (rather than the front or rear of the gate posts) can allow the gates to open both in and out. Hinges wraparound both gates hence the alternate name of wraparound hinges. Sizing refers to the top hinge only, bottom hinge is a standard size of approx 150mm to hinge pin centre. Sold per set (enough for one gate) and supplied with all fixings for a typical installation. Supplied with all screws & bolts Suitable for gates 3" / 75mm thick.

Perry Field Gate Hinge Sets (Bottom Hinge Adjustable) on 4″ Square Plates Galvanised

£23.22£31.38
Commonly found on field gates, the field gate hinge sets when fitted with the hinge plates within the gate opening (rather than the front or rear of the gate posts) can allow the gates to open both in and out. Hinges wraparound both gates hence the alternate name of wraparound hinges. Sizing refers to the top hinge only, bottom hinge is supplied in two pieces that clamps around bottom stile of gate and allows for adjustment by way of a threaded bolt. Suitable for gates 3" / 75mm thick. Sold per set (enough for one gate) and supplied with all fixings for a typical installation.