Showing 28–33 of 33 results

D&D Lokklatch Series 2

£36.42£55.12
The D&D Lokklatch Series 2 is suitable for metal, vinyl & timber gates and supplied with three wafer style keys. Select the 'external access kit' option if you want to be able to operate from both sides of gate. Minimum post size: 25mm / 1" Ideal clearance gap: 19mm / 3/4" * Only suitable for square posts/gate frames (i.e. not rounded posts or frames).

Driveway Gate Ironmongery Pack (Black)

From: £36.78
Driveway Gate Ironmongery Pack in Black, suitable for driveway gates. The Dropbolt options include a Black Dropbolt or Galvanised Lockable Dropbolt, as there is no Lockable version available in Black.

Choosing Hinges

First choose your hinges. For gates over 2130mm high, a third hinge should be added. The length of a hinge is denoted by gate width - for normal domestic use the hinges should be 1/3 (one third) of the width of the each gate. For industrial or heavy domestic use then hinges should be 1/2 (half) of the width of the gate.

Dropbolt

The dropbolt secures the secondary gate to the floor.

Throw over loops for metal gates

£37.49£95.39
Throw over gate loops suitable for metal field gates. Choose from 4 versions - Lockable 860mm, flat sided 750mm (non lockable), 660mm Lift & Slide (non lockable) & 350mm (non lockable) Simply bolt onto gates. Galvanised finish.

Senior Reliance Garage Door Holders (Cord Operated)

£37.56
If you’ve ever tried to garage your vehicle on a windy day you run the risk of the doors slamming on you as you attempt to drive in, then you need garage door holders! Simply fit to the top of the doors and then the top of the frame/lintel. To operate,  open the doors to 90 degrees and the doors will then lock in place enabling you to drive into your garage without the risk of the doors slamming shut on your car. To close the doors, simply pull the cord and push the doors closed – easy! There are two versions of the garage door holders available: Narrow stile which are the most commonly used or a Wide lintel variety. Garage Door Holders come with all fixings and fitting instructions and are supplied in pairs (enough for one pair of garage doors) Please note that the garage door holders will not work on timber framed garages where you have an angled corner brace between the top of the door frame and vertical upright (side) of the door frame. In some cases these corner braces are decorative and can be removed but if in any doubt you would need to take professional advice. Please see the specification drawing to find out which is suitable for you.

D&D T-Latch Toggle Latch

£37.90
The T-Latch is a general purpose gate latch designed to replace conventional metal gravity latches. This toggle-action gate latch is both simple and quick to install and is highly effective, with its pivot-style latch bolt that toggles vertically to automatically accommodate gate sag and ground movement.
  • Stainless steel striker bolt & fasteners -Strong, secure and rust proof
  • Vertically & horizontally adjustable - Overcomes ground movement and gate sag
  • Innovative Toggle action - Compensates for gate sag
  • Padlockable with storage feature - Provides easy access (Padlock not included)
  • Strong, molded polymer & stainless steel -Won't rust, bind, sag or stain
  • Limited lifetime warranty -Rigorous testing programs ensure our products are of the highest quality, enabling us to back them with a Limited lifetime warranty. If you have any problems, D&D will handle them personally.
  • Weather resistant
Usually despatched within 2-3 days

Perry Scotch Tee Hinges – Stainless Steel (Pair)

£39.46£53.23
Recommended for lighter gates or doors that are no more than 20kg. Although stainless steel Scotch Tee Hinges are a strong version of the classic tee hinge these do lack some of the strength of the cranked band and gudgeon or adjustable hinges. Supplied with screws.