Carpentry and Joinery Glossary A-Z

Explanation of terminology used in Joinery and Carpentry

We’ve put together a glossary of commonly used Carpentry & Joinery terms. Some of the terms have a couple of different meanings and some you will be familiar with and some maybe not so. Due to the sheer amount of Carpentry and Joinery terms, we will spread it over a couple of posts so we can include as many as possible.We begin with A-B

Continue reading

Woodworking joints – Angle joints part 2

Woodworking joints can be divided into three main classifications that correspond to their functions. Joints for increasing the width or surface of timber
Joints in length for increasing the lengths of timber,
Joints in width for increasing the width of timber,
Angle joints.

Joints in length

This type of joint is used where the required length of timber is unavailable. The four main types are:
Scarf joints, Laminated joints, Heading joint and Handrail bolt.

Joints in width

This type of joint is used to form wider boards for say work/counter tops, cabinet work or shelving or to enable narrow boards to cover larger areas such as flooring or cladding.

Angle joints

This group of joints is a broad one and covers a large variety of joints, such as mitre joint, halving joint, mortice and tenon, dovetailing, housing, bridle, etc.

In part one we shall be looking at angle joints.

Continue reading

Treating Your Wooden Gates

Like all exterior joinery, our wooden gates and garage doors need protecting from the extremes of the British climate, if they are to last for many years. There are many types of treatments available from paints to stains and oils.

If you decide to oil your wooden gates or doors then be aware that you could end up having to regularly apply additional coats of oil every 2-3 months to keep the timber in tip-top condition.

Continue reading