Usually despatched within 2-3 days
Perry Primus 3D Flying Pig Weathervane With Garden Stake
Pigs will fly…well, they certainly can with your very own flying pig weathervane!
80cm x 11cm x 162cm
Also available are the following for the piggy weathervane –
Weathervane wall mount –
The wall mount which enables you to attached the weathervane to any wall, chimney stack, gable end. The wall mount attaches directly to masonry and places the weathervane above or beyond chimney pots. The Weathervane will place tension on the base plate.
Weathervane floor mount –
The Weathervane floor mount is ideal for mounting the weathervanes onto flat roofs, tops of walls or onto posts. The base plate is 75mm x 75mm (3″ x 3″). Please ensure the surface you are fixing to exceeds these dimensions.
Weathervane roof mount –
The weathervane roof mount has an adjustable pitch bracket with two feet or pads. The feet or pads are adjusted to suit the pitch of the roof and are secured by four long screws (not supplied) through each pad into the roof or tile. It is recommended that a silicon sealant is used to create a water/weatherproof seal.