Shown in stained (an Oak stain) Idigbo (Hardwood), our Nannerch drive gates feature a diminishing gunstock head which reduces down from the tallest point by 2 3/4″ (70mm).
Also available made to measure in European Oak, Meranti (all Hardwoods) as well as the Idigbo shown and Accoya (Acetylated Softwood) and Unsorted Scandinavian Redwood (Softwood) – the Nannerch is ideal if you want a gate for privacy but want a simple bit of shape at the top of the gates!
As well as the drive gates pictured, our Nannerch gates are also available as a pedestrian gate meaning you can have a complete matching set of drive gates and pedestrian gates to complete the look!
The Nannerch gates pictured have been customised and are an ‘unequally split’ pair (i.e. one gate is bigger than the other), the traditionally split 50/50 split (each gate being the same size) are also available – please contact us with your requirements.
Want a bigger or smaller pair of gates than what is pictured? No problem, as with every pair of drive gates pictured on our website the Nannerch drive gates are made to suit your own drive – however unusual the sizes, give us a call or email for a full personalised costing!
Have we a pedestrian gate to match? You bet!
Nannerch driveway gates – specifications
All top edges on any horizontal rails of the Nannerch feature an angled water run off, this stops the build up of moisture on your gates and makes for a longer lifespan. The stiles of the Nannerch (vertical outer uprights of the gate frame) also have rounded outer edges.
Available in a choice of five timbers –
- Unsorted Scandinavian Redwood (Softwood)
- Accoya (Modified Acetylated Softwood)
- Meranti (Hardwood)
- Idigbo (Hardwood)
- Prime European Oak (Hardwood)Construction – Wedged morticed and tenon jointed
Height – Made to measure
Width – Made to measure
Stiles – 2 3/4″ x 2 3/4″ / 70mm x 70mm
Gunstock head – 6 1/2″ diminishing to 2 3/4″ / 165mm diminishing to 70mm
Hidden rails – (Visible from rear only) 2 3/4″ x 1 7/8″ / 70mm x 48mm
Boarding – 3 3/4″ x / 95mm x 15mm
Nannerch Guide prices
The Nannerch guide prices are based on a pair of gates 6ft high x 6ft overall wide (approx 1830mm high x 1830mm overall wide) equally split gates, these are NOT from prices, smaller gates will be more economical etc – contact us for a price! All prices are correct time of insertion and are EX VAT. Free delivery to most parts of the UK mainland is included – exclusions do apply, again please contact us.
Scandinavian Redwood – Softwood £562
We use Unsorted Scandinavian Redwood, despite it’s name it is sorted for smaller knot size and less of them for better strength. Creamy white to yellow in colour.
Can be painted or stained.
Approx weight guide 550 KG/M3
Meranti – Hardwood £874
Used as a Mahogany substitute. Can vary in colour from a pinky red to dark red colour.
Can be painted or stained.
Approx weight guide 550-710 KG/M3
Idigbo – Hardwood £1030
A plain light brown timber which gives the Oak look but without the Oak price tag. As strong as English Oak. Also known in the trade as ‘poor mans oak’.
Can be stained, however avoid painting.
Approx weight guide 560 KG/M3
Accoya – Modified Softwood £1616
The most longer lasting timber on the market! Doesn’t absorb water so doesn’t rot, also as water is not absorbed then any movement within the timber is minimal! Ideal even for the most challenging enviroments. Timber is guaranteed for 50 years againts rot and decay. Recommended ironmongery and fixings for Accoya is Marine Grade Stainless Steel. Can be painted or stained.
We use Grade A1 Accoya specially sorted with few knots.
Approx weight guide 510KG/M3
European Oak – Hardwood £1875
Oak needs no introduction, appearance wise it is a light yellow to brown colour. We use the Prime grade of European Oak with fewer knots for unbeatable strength and maximum wow factor! Recommended fixings for Oak is Marine Grade Stainless Steel.
Can be stained, as with Idigbo avoid painting.
Approx weight guide 720 KG/M3