A Tudor arched headed gate fit for a King (or Queen!).
Shown in Meranti (Hardwood) our stunning Tudor arched gate is a byword for elegance.
With a full thickness head that is based on a four centred arch, our Tudor arched gate is a gate that will certainly turn heads and have people talking for all the right reasons!
Made to measure to suit your requirements in Hardwood only (Meranti, Idigbo and European Oak) and Modified Accoya Softwood, the Tudor arched pedestrian gate can be manufactured to suit your home and is the ideal gate to suit either a Tudor arched opening within a wall or as a stand-alone side access/pedestrian gate.
Fancy something a bit different for your home? Why not give the Tudor arched headed gate a try?
The Tudor arched gate is made to measure in overall widths up to 3ft 6/1016mm wide.
If you are intending to fit the gate within an existing Tudor arched opening, then please contact us with your individual requirements as we can manufacture something to suit your current openings – though we may need a template or pattern of the top of the gateway to ensure the perfect finish.
A matching Tudor arched frame can also be manufactured.
The Tudor arched gate is made to measure in overall widths up to 3ft 6/ 1016mm wide.
Tudor arched pedestrian gates – specifications
All top edges on any horizontal rails of the Tudor arched gate feature an angled water run off, this stops the build up of moisture on your gates and makes for a longer lifespan. The stiles of the Tudor gates (vertical outer uprights of the gate frame) also have rounded outer edges.
Available in the following timbers –
- Prime European Oak (Hardwood)
- Accoya (Modified Softwood)
- Idigbo (Hardwood)
- Meranti (Hardwood)
Construction – Through wedged, morticed & tenoned
Height – Made to measure
Width – Made to Measure – up to a maximum of 3ft 6 / 1016mm wide
Tudor head – Based on a four centre tudor arch, 2 3/4″ x 2 3/4″ / 70mm x 70mm
Stiles – 2 3/4″ x 2 3/4″ / 70mm x 70mm
Hidden rails (visible from rear only) – 2 3/4″ x 1 7/8″ / 70mm x 48mm
Boarding – 3 3/4″ x 5/8″ / 95mm x 15mm
Not feeling very regal or want an alternative arched gate?
Tudor arch Guide prices
The Tudor arch guide prices are based on a single gate 6ft high x 3ft overall wide (approx 1830mm high x 915mm wide), these are NOT from prices, smaller gates will be more economical etc – contact us for a price! All prices are correct time of insertion and are EX VAT. Free delivery to most parts of the UK mainland is included – exclusions do apply, again please contact us.
For arched postern style gates (gates that will fit into an arched brick opening), please contact us for guide prices.
The Tudor arched gate is only manufactured in Hardwood and Accoya
Meranti – Hardwood £855
Used as a Mahogany substitute. Can vary in colour from a pinky red to dark red colour.
Can be painted or stained.
Approx weight guide 550-710 KG/M3
Idigbo – Hardwood £918
A plain light brown timber which gives the Oak look but without the Oak price tag. As strong as English Oak. Also known in the trade as ‘poor mans oak’.
Can be stained, however avoid painting.
Approx weight guide 560 KG/M3
Accoya – Modified Softwood £1483
The most longer lasting timber on the market! Doesn’t absorb water so doesn’t rot, also as water is not absorbed then any movement within the timber is minimal! Ideal even for the most challenging environments. Timber is guaranteed for 50 years against rot and decay. Recommended ironmongery and fixings for Accoya is Marine Grade Stainless Steel. Can be painted or stained.
We use Grade A1 Accoya specially sorted with few knots.
Approx weight guide 510KG/M3
European Oak – Hardwood £1613
Oak needs no introduction, appearance wise it is a light yellow to brown colour. We use the Prime grade of European Oak with fewer knots for unbeatable strength and maximum wow factor! Recommended fixings for Oak is Marine Grade Stainless Steel.
Can be stained, as with Idigbo avoid painting.
Approx weight guide 720 KG/M3