Shown in Idigbo (Hardwood), our St Asaph driveway gates are ideal if you want something similar to either our Caernarfon or Harlech gates but slightly ‘less fussy’ and more minimalist!
The St Asaph pair of gates shown has been customised by our customer, into an unequally split pair of driveway gates – one gate as a pedestrian sized gate and the other gate being larger to suit the remainder of the opening.
Want the more usual 50/50 equally split gates? Not a problem, the St Asaph driveway gates can be customised to your requirements.
A matching pedestrian gate and garden gate is also manufactured.
Want a bigger or smaller pair of gates than what is pictured?
Again no problem, as with every pair of driveway gates pictured on our website the St Asaph gates are made to suit your own driveway – however unusual the sizes, give us a call for a full personalised costing!
St Asaph driveway gates – specifications
All top edges on any horizontal rails of the St Asaph feature an angled water run off, this stops the build up of moisture on your gates and makes for a longer lifespan. The stiles of the St Asaph (vertical outer uprights of the gate frame) also have rounded outer edges.
Available in the following five kiln dried timbers –
- Prime European Oak (Hardwood),
- Accoya (Acetylated Softwood),
- Idigbo (Hardwood),
- Meranti (Hardwood),
- Scandinavian Redwood (Softwood)
Automation – Can be automated, please contact us for details
Construction – Through wedged, morticed & tenoned jointed
Height – Made to measure
Width – Made to Measure
Stiles – 2 3/4″ x 2 3/4″ / 70mm x 70mm
Top rail/Head & Full thickness mid rails – 2 3/4″ x 2 3/4″ / 70mm x 70mm
Hidden rails (visible from rear only) – 2 3/4″ x 1 7/8″ / 70mm x 48mm
Boarding – 3 3/4″ x 5/8″ / 95mm x 15mm
Infill (top ‘open vision panel’ section)– 1 3/4″ x 3/4″ / 45mm x 18mm (with gaps of no more than 8″/200mm between uprights)
St Asaph Guide prices
The St Asaph guide prices are based on a pair of gates 6ft high x 6ft overall wide (1830mm high x 1830mm overall wide) equally split gates, these are NOT from prices, smaller gates will be more economical etc – contact us for a price! All prices are correct time of insertion and are EX VAT. Free delivery to most parts of the UK mainland is included – exclusions do apply, again please contact us.
Scandinavian Redwood – Softwood £561
We use Unsorted Scandinavian Redwood, despite it’s name it is sorted for smaller knot size and less of them for better strength. Creamy white to yellow in colour.
Can be painted or stained.
Approx weight guide 550 KG/M3
Meranti – Hardwood £860
Used as a Mahogany substitute. Can vary in colour from a pinky red to dark red colour.
Can be painted or stained.
Approx weight guide 550-710 KG/M3
Idigbo – Hardwood £1010
A plain light brown timber which gives the Oak look but without the Oak price tag. As strong as English Oak. Also known in the trade as ‘poor mans oak’.
Can be stained, however avoid painting.
Approx weight guide 560 KG/M3
Accoya – Modified Softwood £1581
The most longer lasting timber on the market! Doesn’t absorb water so doesn’t rot, also as water is not absorbed then any movement within the timber is minimal! Ideal even for the most challenging environments. Timber is guaranteed for 50 years against rot and decay. Recommended ironmongery and fixings for Accoya is Marine Grade Stainless Steel. Can be painted or stained.
We use Grade A1 Accoya specially sorted with few knots.
Approx weight guide 510KG/M3
European Oak – Hardwood £1836
Oak needs no introduction, appearance wise it is a light yellow to brown colour. We use the Prime grade of European Oak with fewer knots for unbeatable strength and maximum wow factor! Recommended fixings for Oak is Marine Grade Stainless Steel.
Can be stained, as with Idigbo avoid painting.
Approx weight guide 720 KG/M3