Senior Reliance Garage Door Holders (Cord Operated)

Price range: £37.56 through £39.96

(7 customer reviews)
Click for description:

If you’ve ever tried to garage your vehicle on a windy day you run the risk of the doors slamming on you as you attempt to drive in, then you need garage door holders!

There are two versions of the garage door holders available: Narrow stile which are the most commonly used or a Wide lintel variety.

Garage Door Holders come with all fixings and fitting instructions and are supplied in pairs (enough for one pair of garage doors)

Please see the specification drawing to find out which is suitable for you.

Which ironmongery finish?

Marine grade stainless steel -

Unlike coated steel, the corrosion resistance comes from the stainless steel itself, so there is no coating to chip, peel or wear away. One of the most durable options for outdoor ironmongery.

Ideal for coastal environments and for use on acidic timbers such as Accoya, Oak, Western Red Cedar & Iroko.

Appearance silvery-grey in colour.

Black on galvanised - 

This finish combines two protection systems into one: the steel hinge is first hot-dip galvanised, then a black polyester or epoxy powder coat is baked over the zinc layer. One coating fights corrosion chemically, the other shields it physically. 

The idea is simple. Galvanising handles the long battle with weather, while the powder coat provides appearance and extra shielding.

Galvanised - 

Hot spelter galvanising, often shortened to hot-dip galvanised or simply HDG, is one of the oldest and most trusted protective finishes used on steel ironmongery. Instead of sitting on the surface like paint or lacquer, it becomes part of the metal itself. 

Appearance wise a silvery grey colour and can be quite a rustic looking finish.

Black powder coated - 

An epoxy black finish is created by applying an electrostatically charged dry powder to bare self-colour steel and then baking it in an oven. The heat melts the powder into a continuous skin that wraps the metal in a uniform protective layer.

Unlike the "black on galv" finish, if the coating becomes scratched then the bare metal can rust.

Bright Zinc Plated -

Bright zinc plating, often called BZP or electro-galvanising (E-Galv), is created by passing an electrical current through a chemical bath that deposits a very thin layer of zinc onto steel. Unlike hot-dip galvanising, no molten metal and no alloy layers are involved. The coating is precise, controlled and smooth.

Appearance wise it's a shiny silvery-grey.

Self Colour - 

Self colour steel is exactly what leaves the mill or the fabricator. No plating, no paint, no galvanising. Just bare carbon steel with its natural mill scale and workshop character intact. Usually used for fabrication (i.e. welding) where the finished item will be sprayed or painted upon completion.

* Not all items are available in every finish.

Description

If you’ve ever tried to garage your vehicle on a windy day you run the risk of the doors slamming on you as you attempt to drive in, then garage door holders are a must!

Simply fit to the top of the doors and then the top of the frame/lintel. To operate,  open the doors to 90 degrees and the doors will then lock in place enabling you to drive into your garage without the risk of the doors slamming shut on your car. To close the doors, simply pull the cord and push the doors closed – easy!

There are two versions of the garage door holders available: Narrow stile which are the most commonly used or a Wide lintel variety.

Garage Door Holders come with all fixings and fitting instructions and are supplied in pairs (enough for one pair of garage doors)

Please note that the garage door holders will not work on timber framed garages where you have an angled corner brace between the top of the door frame and vertical upright (side) of the door frame. In some cases these corner braces are decorative and can be removed but if in any doubt you would need to take professional advice.

Please see the specification drawing to find out which is suitable for you.

Our Guarantee

Gate Expectation’s mission is to bring the highest quality bespoke measured wooden gates, side hung wooden garage doors and general joinery items to the market at a quality and price point that can’t be matched.

If not completely satisfied we offer 30-day no hassle returns on all our off-the-shelf range.

Three generations of master carpentry and joinery experience in each and every product. Read more about our history here.

Orders are despatched Monday to Friday only (excluding Bank Holidays).

All orders received prior to 12pm on the day are despatched the same day using either Royal Mail Tracked 24 or DPD for a fully tracked delivery.

If you are happy for the items to be left somewhere safe (i.e. either with a neighbour or somewhere secure on your property) then please do let us know in the ‘Customer notes’ section of our checkout page.

Once despatched your will receive an email and text (if we have a mobile telephone number for you) from DPD confirming that they have your parcel or Royal Mail with tracking details confirming that they have your parcel

For DPD deliveries, on the day of delivery you’ll again receive an email/text from DPD with an approx 2 hour time slot from DPD. If you are not able to be present to receive your parcel you can then rearrange delivery for an alternate day or get the parcel delivered to the nearest DPD pickup shop for you to collect at your convenience.

Please note that due to Brexit we are not currently shipping to Northern Ireland or Europe.

7 reviews for Senior Reliance Garage Door Holders (Cord Operated)

4.9 Rating
1-5 of 7 reviews
  1. GB
  2. PC

    Good quality door holder delivered very quickly, easy to fit and works well

  3. JT

    Garage door holders. Easy to follow website and ordering system.Delivery received on specified date.
    Product as described and was fitted extremely easily.Would definitely recommend company and product on my experience.First class.

  4. TS

    Garage Door Stays. I ordered these as I have a couple of over-sized garage doors that I felt needed additional stability when open on windy days. The original intent was that these would compliment a couple of long-reach cabin hooks that have proved inadequate by themselves in the past.
    Fitting was relatively straightforward. However the central pivot rivet needs to be recessed into the lintel, which wasn’t mentioned in the fitting instructions. However this is well within the capabilities of a competent woodworker and did not cause any issues.
    Having fitted these, I have now found that the stays are more than adequate as hold-open devices by themselves, with no need for the additional cabin hooks.

  5. MS

    Good quality. Don’t buy Timco, the market is being flooded by the cheep timco door holders. They are cheep crap. These ones are very good quality.

Add a review
You must be logged in to post a review. Log In

Related Products