Made to measure in sizes you require

British woodworking federation approved

3 Generations of time-served master craftsmen

Five Bar Estate Gates with Crooked Stiles Singles

Crook stile five bar single Estate gates.

Made to measure in a choice of 5 timbers.

Through wedged morticed & tenon jointed frame.

* Both our Crook stile singles & Crook stiles pairs are only available collected from our North Wales workshops or delivered locally to us.

Height (to top of top rail) is usually around 1200mm high but can be adjusted from 1000mm to 1400mm.
Height to top of elongated crooked stile is usually 1800mm

Made to measure from 700mm wide upto 2100mm wide (and everything in between!)

Want to use imperial instead of metric? Use our converter here

Out of stock

Out of stock

Email when stock available

Current lead times are approx 12-13 weeks at present

Description

Based on a through wedged morticed and tenon jointed frame with an elegant crook stile topping the gate off !

Top rail of gate reduces from crook side of gate from 95mm down to 70mm on the underside. Top rail also features a saddleback moulding to remove any excess moisture build up.

Crook stile is a one piece stile, shaped with the traditional curved sweep.

Diagonal bracing is coachbolt through the every part of the gate that it sits upon.

Made to measure in widths from 800mm to 2100mm (and everything in between!).

Usually the Estate gates with a crook stile have a top rail at 1220mm / 4ft from bottom of gate (with crook stile being 1830mm / 6ft tall in total), however you do have a bit of room to customise the heights.

Heights can be from 1000mm upto 1400mm high, bear in mind if you reduce the heights then the bars/rails will look crammed in and if you go taller then there will be bigger spaces between the bars/rails!

I want to automate my Estate gate?

If automating then with an Estate gate you would usually use a below ground automation system, as such you will need to add a full thickness bottom rail to the gate.

If you opt for an above ground automation system then it would usually attach to the top rail of the gate, which tends to look unsightly!

Crook stile Estate gate Specifications –

Crook stile – 95mm x 70mm / 3 3/4″ x 2 3/4″
Crook stile sits above the top rail by 24″/600mm
Clashing stile (opposite hinge side) – 70mm x 70mm / 2 3/4″ x 2 3/4″
Top rail – Reducing from 95mm / 3 3/4″ from crook side down to 70mm /  2 3/4″ on clashing side of gate
All other rails – 70mm x 25mm / 2 3/4″ x 1″

What timbers are the Estate gates available in?

The single crooked stile gates are made to measure in choice of five timbers –
Scandinavian Redwood (Softwood)
Meranti (Hardwood)
Idigbo (Hardwood)
A1 Accoya (Modified Softwood)
Prime Grade European Oak

Our Guarantee

Gate Expectation’s mission is to bring the highest quality bespoke measured wooden gates, side hung wooden garage doors and general joinery items to the market at a quality and price point that can’t be matched.

If not completely satisfied we offer 30-day no hassle returns on all our off-the-shelf range.

Three generations of master carpentry and joinery experience in each and every product. Read more about our history here.

Every thing we manufacture is made to measure by our British Woodworking Federation Approved  Joiners.  

Upon receipt of any order then an full order confirmation is sent out (this will follow the auto  generated email that you receive immediately after placing an order). 

This order confirmation email gives you a chance to double check sizes and for us to confirm final  details. 

Once an order is received you will receive a ‘completion week’ within your order confirmation  email. Once the gate is ready for despatch we will contact you to arrange a suitable day for delivery, we do not just send the completed gates out and hope for the best! 

Deliveries are Tuesdays-Fridays only, excluding any Bank Holidays/Public Holidays. 

Where possible we try and use a dedicated van for deliveries so like to try and group several  deliveries within the same area on the same day, but we do also use Nationwide carriers as well. 

For deliveries further afield we will ship on a carrier. 

All prices gate prices include delivery to most parts of the UK mainland. Exclusions to this are  highlands or Scotland and off shore areas of the UK (Scottish Islands, Isle of Wight, Isle of Man,  Channel Islands). 

Additional delivery charges  

Scottish Highlands (3-5 day) £46 

Scilly / Scottish Islands (3-5day) £56 

Isle of Wight £36 

Isle of Man (3-5 day) £76  

Channel Islands (3-5 day) £56 

All inc VAT 

Please note that due to Brexit we are currently not shipping to Northern Ireland or Europe.

Imperial Converter



Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)