Made to measure in sizes you require

British woodworking federation approved

3 Generations of time-served master craftsmen

Five Bar Estate Gates Singles

Single five bar Estate gates available in 5 selected timbers.

Made to measure in overall widths from 700mm upto 2100mm wide (and everything in between!)

Through wedged morticed & tenon jointed frame.

Height (to top of top rail) is usually around 1200mm high but can be adjusted from 1000mm to 1400mm.

Want to use imperial instead of metric? Use our converter here

Enter your required gate height (to top of top rail)
Enter your overall opening width between posts here.
Prices online are for heights 1000mm to 1400mm high and from 700mm wide up to 2100mm wide.

For sizes outside these ranges please contact us at
enquiries@woodworkersuk.co.uk for a personalised costing.
Please select from our range of timbers
Accoya is priced as suitable for painting, if you intend to stain the timber then please contact us for a price enquiries@woodworkersuk.co.uk.
When looking at the gate from the front, is the hinge side the right hand side OR left hand side?
As standard gates have bottom rail that can only be seen from rear, this puts bottom rail that can be seen from both sides
Fixing stile options
Posts for fixing to a wall or other structure. Priced per stile. Supplied in same timber as your gates.
Posts for fixing to a wall or other structure. Priced per stile.( 95mm x 70mm with 20mm x 20mm loose stop) supplied in same timber as your gates.
4 way weather cut softwood posts
100mm x 100mm (+£54.00)
4 way weather cut softwood posts
125mm x 125mm (+£79.20)
4 way weather cut softwood posts
150mm x 150mm (+£112.80)
square tanalised softwood posts
175mm x 175mm (+£163.20)
square tanalised softwood posts
200mm x 200mm (+£187.20)
All priced per post. As a rule of thumb post size should be for every 12" (300mm) of gate, posts should be 1" (25mm) + 1" (25mm). Posts upto 150mm / 6" square are 4 way weather cut on top. Posts over this are square cut.
ironmongery options for pedestrian gates
All packs contain 1 Pair 14" Adjustable gate hinges, 1 No 6" Ringlatch plus all fixings & 1 8" Cabin hook. (* Black on galv & Marine grade stainless steel hinge options are 18" Adjustable hinges. Cabin hook for Stainless steel is a 4" Cabin hook).
All packs contain 1 Pair 18"/450mm Adjustable gate hinges, 1 No 6" Ringlatch plus all fixings & 1 8" Cabin hook. (* Cabin hook for Stainless steel is a 4" Cabin hook).
All packs contain 1 Pair 24" / 600mm Adjustable gate hinges, 1 No 6" Ringlatch plus all fixings & 1 8" Cabin hook. (* Cabin hook for Stainless steel is a 4" Cabin hook).
All packs contain 1 Pair 36" / 915mm Adjustable gate hinges, 1 No 6" Ringlatch plus all fixings & 1 8" Cabin hook. (* Cabin hook for Stainless steel is a 4" Cabin hook).
Any additional details you think might be relevant to help us build your bespoke product.
Grand total
Pay a deposit of 25% per item
Current lead times are approx 8-10 weeks at present

Description

Our five bar estate gates are all based on a through wedged morticed and tenon jointed frame!

Top rail of gate reduces from crook side of gate from 95mm down to 70mm on the underside. Top rail also features a saddleback moulding to remove any excess moisture build up.

Crook stile is a one piece stile, shaped with the traditional curved sweep.

Diagonal bracing is secured to all rails with coachbolts.

Made to measure in widths from 700mm to 2100mm (and everything in between!).

Height would generally be 1220mm to top of top rail but can be from 1000mm upto 1400mm high, bear in mind if you reduce the heights then the bars/rails will look crammed in and if you go taller then there will be bigger spaces between the bars/rails!

I want to automate my Estate gate?

If automating then with an Estate gate you would usually use a below ground automation system, as such you will need to add a full thickness bottom rail to the gate.

If you opt for an above ground automation system then it would usually attach to the top rail of the gate, which tends to look unsightly!

Estate gate singles Specifications –

Crook stile – 95mm x 70mm / 3 3/4″ x 2 3/4″
Crook stile sits above the top rail by 24″/600mm
Clashing stile (opposite hinge side) – 70mm x 70mm / 2 3/4″ x 2 3/4″
Top rail – Reducing from 95mm / 3 3/4″ from crook side down to 70mm /  2 3/4″ on clashing side of gate
All other rails – 70mm x 25mm / 2 3/4″ x 1″

What timbers are the single Estate gates manufactured in?

The single estate gates are made to measure in choice of five timbers –
Scandinavian Redwood (Softwood)
Meranti (Hardwood)
Idigbo (Hardwood)
A1 Accoya (Modified Softwood)
Prime Grade European Oak

Our Guarantee

Gate Expectation’s mission is to bring the highest quality bespoke measured wooden gates, side hung wooden garage doors and general joinery items to the market at a quality and price point that can’t be matched.

If not completely satisfied we offer 30-day no hassle returns on all our off-the-shelf range.

Three generations of master carpentry and joinery experience in each and every product. Read more about our history here.

Imperial Converter



Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)