Five Bar Estate Gates Pairs

Five bar Estate gates manufactured as pairs.

Made to measure in a choice of 5 selected timbers.

Through wedged morticed & tenon jointed frame.

Available with full UK delivery.

Height (to top of top rail) is usually around 1220mm high but can be adjusted from 1000mm to 1400mm.

Made to measure from 1400mm wide upto 4200mm wide (and everything in between!)

Want to use imperial instead of metric? Use our converter here

Enter your required gate height (to top of top rail). Joggles (pointy bits that protrude above top rail increase this height by 65mm)
Enter your overall opening width between posts here (or overall two gate combined width if you have worked this out)
Scan Redwood (+...)
Meranti (+...)
Idigbo Hardwood (+...)
A1 Accoya (+...)
Prime European Oak (+...)
Please select from our range of timbers
As standard gates have bottom rail that can only be seen from rear, this puts bottom rail that can be seen from both sides
50/50 split is where both gates of the pair are the same size. Unequally split gives you one gate larger than the other so one gate can be used as a pedestrian access gate.
Maximum width of a single gate is 2100mm. Please state preferred width of gates for split. For example if total width is 3000mm, you can state 1000mm and 2000mm.
Which gate is the smaller gate when viewed from the front? Left or Right.
Fixing stile options
Posts for fixing to a wall or other structure. Priced per stile. Supplied in same timber as your gates.
Posts for fixing to a wall or other structure. Priced per stile.( 95mm x 70mm with 20mm x 20mm loose stop) supplied in same timber as your gates.
100mm x 100mm (+£54.00)
125mm x 125mm (+£79.20)
150mm x 150mm (+£112.80)
175mm x 175mm (+£163.20)
200mm x 200mm (+£187.20)
All priced per post. As a rule of thumb post size should be for every 12" (300mm) of gate, posts should be 1" (25mm) + 1" (25mm). Posts upto 150mm / 6" square are 4 way weather cut on top. Posts over this are square cut.
Ironmongery options for driveway gates
Ironmongery packs for your driveway gates. All packs contains 2 Pair 18" Adjustable gate hinges, 2 x 18" Dropbolts & 1 x 6" Ringlatch. All fixings included.
Ironmongery packs for your driveway gates. All packs contains 2 Pair 24" Adjustable gate hinges, 2 x 18" Dropbolts & 1 x 6" Ringlatch. All fixings included.
Ironmongery packs for your driveway gates. All packs contains 2 Pair 36" Adjustable gate hinges, 2 x 18" Dropbolts & 1 x 6" Ringlatch. All fixings included.
200mm / 8" Black Brenton Padbolt
8" Black Brenton Padbolt (+£3.26)
200mm / 8" galvanised Brenton Padbolt
8" Galvanised Brenton Padbolt (+£3.60)
200mm / 8" Black on galvanised Brenton Padbolt
200mm/8" Black over Galv Brenton Padbolt (+£13.20)
8 inch 200mm Marine grade stainless steel brenton padbolt
8" Marine Grade Stainless Steel Brenton Padbolt (+£34.80)
An 18" / 450mm lockable throw over gate loop
18" /450mm GalvanisedLockable throw over loop (+£20.40)
Any additional details you think might be relevant to help us build your bespoke product.
Grand total
Current lead times are approx 8-10 weeks at present

Description

Our Five bar Estate gates as manufactured in pairs.

Available made to measure in Scandinavian Redwood, Meranti, Idigbo, Accoya and Oak, in overall widths from 1400mm wide upto 4200mm wide (and everything in between).

Top rail heights can be from 1000mm upto 1400mm high, bear in mind if you reduce the heights then the bars/rails will look crammed in and if you go taller then there will be bigger spaces between the bars/rails!

One Estate gate bigger than the other?

The Estate gates can be manufactured as unequally split pairs, with the larger gate no wider than 2100mm wide.

I want to automate my Estate gate?

If automating then with an Estate gate you would usually use a below ground automation system, as such you will need to add a full thickness bottom rail to the gate.

If you opt for an above ground automation system then it would usually attach to the top rail of the gate, which tends to look unsightly!

Estate gate pairs Specifications –

Max width per gate – 2100mm (4200mm wide for the pair).
Clashing stile (opposite hinge side) – 70mm x 70mm / 2 3/4″ x 2 3/4″
Top rail – Reducing from 95mm / 3 3/4″ from crook side down to 70mm /  2 3/4″ on meeting stiles of gate
All other rails – 70mm x 25mm / 2 3/4″ x 1″

Full thickness bottom rail (where selected) – 145mm / 5 3/4″ x 70mm / 2 3/4″

What timbers are the Estate gates available in?

Our Estate gates are made to measure in choice of five selected timbers –
Scandinavian Redwood (Softwood)
Meranti (Hardwood)
Idigbo (Hardwood)
A1 Accoya (Modified Softwood)
Prime Grade European Oak

Our Guarantee

Gate Expectation’s mission is to bring the highest quality bespoke measured wooden gates, side hung wooden garage doors and general joinery items to the market at a quality and price point that can’t be matched.

If not completely satisfied we offer 30-day no hassle returns on all our off-the-shelf range.

Three generations of master carpentry and joinery experience in each and every product. Read more about our history here.

Imperial Converter