Degawny Pedestrian Gate

Our Deganwy gates feature an open vision panel section, unlike our St Asaph gates (on which the Deganwy were based) the vision panel is full width and completely open.

Open section in the Deganwy starts at 220mm high but can be wider if you prefer.

Made to measure in our five selected timbers and based on a full wedged mortice and tenon jointed frame.

Get a price online from 700mm to 2100mm high & 600mm to 1500mm wide – for sizes outside these please contact us!

Want to use imperial instead of metric? Use our converter here

Enter your required gate height in mm, usually you will allow 50mm / 2" clearances under the gates.
Enter your required gate width (mm)
Scan Redwood (+...)
Meranti (+...)
Idigbo Hardwood (+...)
A1 Accoya (+...)
Prime European Oak (+...)
Please select from our range of timbers
Accoya is priced as suitable for painting, if you intend to stain the timber then please contact us for a price enquiries@woodworkersuk.co.uk.

Prices online are for heights between 700mm to 2100mm high (at highest point) & 600mm wide to 1500mm wide, for any sizes outside these please contact us at
enquiries@woodworkersuk.co.uk for a personalised costing.
Diagram showing and explaining how to measure for single gates
Curved joggles to give the gates strength
Curved (Standard)
Pyramid joggles to give the gates strength
Pyramid
Angled joggles to give the gates strength
Angled
Rounded joggles to give the gates strength
Rounded (+£18.00)
Inverted joggles to give the gates strength
Inverted (+£18.00)
Birdsmouth joggles to give the gates strength
Birdsmouth (+£36.00)
Joggles are the protrusions on top corners of the gates, these give the mortice & tenon joints strength. As standard the joggles are arched/curved.
Close up of a close boarded / fully boarded section of a gate
Close Boarded
Example of the open boarding within a gate
Open Boarded
Open boarded or slatted gates are great if you live in a windy area, as they allow the wind to pass through the gates. Larger close boarded gates can be difficult, at times, to open into a strong wind; you run the risk of the wind dragging them out of your hands; with an open boarded gate, this can be greatly reduced.
As standard when looking at the rear of the gate you can see the horizontal rails & braces. If you select double bracing then these centre rails and braces cannot be seen.
Looking at the rear of the gate, is the hinge side the left OR right hand side & do you intend to fit the hinges to front OR rear of the gate?
add a full thickness bottom rail
As standard gates have bottom rail that can only be seen from rear, from the front it is covered by the cladding. Add a full thickness bottom rails means the bottom rail can be seen from both sides of the gates, bottom rail being 5 3/4" / 145mm tall with the cladding being jointed into the rail.
Fixing stile options
Posts for fixing to a wall or other structure. Priced per stile. Supplied in same timber as your gates.
Posts for fixing to a wall or other structure. Priced per stile.( 95mm x 70mm with 20mm x 20mm loose stop) supplied in same timber as your gates.
4 way weather cut softwood posts
100mm x 100mm (+£54.00)
4 way weather cut softwood posts
125mm x 125mm (+£79.20)
4 way weather cut softwood posts
150mm x 150mm (+£112.80)
square tanalised softwood posts
175mm x 175mm (+£163.20)
square tanalised softwood posts
200mm x 200mm (+£187.20)
All priced per post. As a rule of thumb post size should be for every 12" (300mm) of gate, posts should be 1" (25mm) + 1" (25mm). Posts upto 150mm / 6" square are 4 way weather cut on top. Posts over this are square cut.
ironmongery options for pedestrian gates
All packs contain 1 Pair 14" Adjustable gate hinges, 1 No 6" Ringlatch plus all fixings & 1 8" Cabin hook. (* Black on galv & Marine grade stainless steel hinge options are 18" Adjustable hinges. Cabin hook for Stainless steel is a 4" Cabin hook).
All packs contain 1 1/2 Pair 14" Adjustable gate hinges, 1 No 6" Ringlatch plus all fixings & 1 8" Cabin hook. (* Black on galv & Marine grade stainless steel hinge options are 18" Adjustable hinges. Cabin hook for Stainless steel is a 4" Cabin hook).
All packs contain 1 Pair 18" Adjustable gate hinges, 1 No 6" Ringlatch plus all fixings & 1 8" Cabin hook. (*Cabin hook for Stainless steel is a 4" Cabin hook).
All packs contain 1 1/2 Pair 18" Adjustable gate hinges, 1 No 6" Ringlatch plus all fixings & 1 8" Cabin hook. (*Cabin hook for Stainless steel is a 4" Cabin hook).
All packs contain 1 pair 24" Adjustable gate hinges, 1 No 6" Ringlatch plus all fixings & 1 8" Cabin hook. (*Cabin hook for Stainless steel is a 4" Cabin hook).
All packs contain 1 1/2 Pair 24" Adjustable gate hinges, 1 No 6" Ringlatch plus all fixings & 1 8" Cabin hook. (*Cabin hook for Stainless steel is a 4" Cabin hook.)
All packs contain 1 1/2 Pair 30" Adjustable gate hinges, 1 No 6" Ringlatch plus all fixings & 1 8" Cabin hook. (* Marine grade stainless steel hinge options are 36" Adjustable hinges. Cabin hook for Stainless steel is a 4" Cabin hook).
All packs contain 1 1/2 Pair 30" Adjustable gate hinges, 1 No 6" Ringlatch plus all fixings & 1 8" Cabin hook. (* Marine grade stainless steel hinge options are 36" Adjustable hinges. Cabin hook for Stainless steel is a 4" Cabin hook).
gate locking options explained
200mm / 8" Black Brenton Padbolt
8" Black Brenton Padbolt (+£3.26)
200mm / 8" galvanised Brenton Padbolt
8" Galvanised Brenton Padbolt (+£3.60)
200mm / 8" Black on galvanised Brenton Padbolt
8" Black on Galvanised Brenton Padbolt (+£13.20)
200mm / 8" Marine Grade Stainless Steel Padbolt
8" Marine Grade Stainless Steel Brenton Padbolt (+£34.80)
Union Strongbolt 5 Lever insurance deadlock brass finish
Union 5 lever Insurance Deadlock (Brass coloured finish) (+£28.80)
Union Strongbolt 5 Lever insurance deadlock chrome finish
Union 5 lever Insurance Deadlock (Chromecoloured finish) (+£28.80)
Easi T 5 Lever insurance deadlock stainless steel
Easi T Stainless Steel 5 Lever Insurance deadlock (+£37.20)
Perry 70mm Double locking long throw gate lock
Perry 70mm Double locking long throw lock (+£44.40)
Perry 70mm Single locking long throw gate lock
Perry 70mm Single locking long throw lock (+£42.00)
Select your choice of locks if required. Mortice deadlocks are the most secure and operated by key from either side. Brenton Padbolts are lockable by way of a padlock (not supplied) and the Long throw locks fit to (usually the rear) of the gates, doube locking is key operated from either side, single locking is key operated from front, with latch on rear to unlock.
Any additional details you think might be relevant to help us build your bespoke product.
Grand total
Current lead times are approx 8-10 weeks at present

Description

Based on a full wedged morticed and tenon jointed frame for strength and rigidity, the Deganwy is available made to measure in five selected timbers and as either an open boarded or close/fully boarded gate

Deganwy gate – specifications

All top edges on any horizontal rails of our Deganwy gate feature an angled water run off, this stops the build up of moisture on your gates and makes for a longer lifespan.

The stiles of the Deganwy (vertical outer uprights of the gate frame) also have rounded outer edges.

Construction – Through wedged, morticed & tenoned jointed
Height – Made to measure
Width – Made to Measure
Stiles – 2 3/4″ x 2 3/4″ / 70mm x 70mm
Top rail/Head & Full thickness mid rails – 2 3/4″ x 2 3/4″ / 70mm x 70mm
Hidden rails (visible from rear only) – 2 3/4″ x 1 7/8″ / 70mm x 48mm
Boarding – 3 3/4″ x 7/8” / 95mm x 15mm
Infill (top ‘open vision panel’ section)– 1 3/4″ x 3/4″ / 45mm x 18mm (with gaps of no more than 8″/200mm between uprights)

Manufactured in the following five selected kiln dried timbers –

Prime European Oak (Hardwood)
Accoya (Acetylated Softwood)
Idigbo (Hardwood)
Meranti (Hardwood)
Scandinavian Redwood (Softwood)

Our Guarantee

Gate Expectation’s mission is to bring the highest quality bespoke measured wooden gates, side hung wooden garage doors and general joinery items to the market at a quality and price point that can’t be matched.

If not completely satisfied we offer 30-day no hassle returns on all our off-the-shelf range.

Three generations of master carpentry and joinery experience in each and every product. Read more about our history here.

Imperial Converter