Denbigh Softwood Pedestrian Gates
Want a flat top pedestrian gate to fit an enclosed opening?
The Denbigh pedestrian gate can also be manufactured with a flat top to allow installation within an enclosed stone or brickwork opening.The Denbigh can be fitted within the opening the traditional way with two posts or we can manufacture a matching frame (without a cill) to match.
All we need to know is whether you require posts or a frame and be sure to let us know that it is being fitted within an enclosed opening so we can allow the required clearances for you.
Looking for an arched or curved gate to fit within an enclosed brickwork opening?
If so then check out the sub section on our semi circular arched gates page for more information!
Denbigh gate in Idigbo, fitted into wall
(Click for larger images)
Denbigh pedestrian gates - specifications
All top edges on any horizontal rails of the Denbigh gate feature an angled water run off, this stops the build up of moisture on your gates and makes for a longer lifespan. The stiles of our Denbigh gate (vertical outer uprights of the gate frame) also have rounded outer edges.
Available in a choice of five timbers –
- Unsorted Scandinavian Redwood (Softwood)
- Accoya (Modified Acetylated Softwood)
- Meranti (Hardwood)
- Idigbo (Hardwood)
- Prime European Oak (Hardwood) Wedged morticed and tenon jointed construction
Height – Made to measure
Width – Made to measure
Heads/top rails & stiles – 2 3/4″ x 2 3/4″ / 70mm x 70mm
Hidden rails – (Visible from rear only) 2 3/4″ x 1 7/8″ / 70mm x 48mm
Boarding – 3 3/4″ x 5/8″/ 95mm x 15mm
Denbigh Guide Prices
The Denbigh guide prices are based on a single gate 6ft high x 3ft overall wide (approx 1830mm high x 915mm wide), these are NOT from prices, smaller gates will be more economical etc – contact us for a price! All prices are correct time of insertion and are EX VAT. Free delivery to most parts of the UK mainland is included – exclusions do apply, again please contact us.
Scandinavian Redwood – Softwood £292
We use Unsorted Scandinavian Redwood, despite it’s name it is sorted for smaller knot size and less of them for better strength. Creamy white to yellow in colour.
Can be painted or stained.
Approx weight guide 550 KG/M3
Accoya – Modified Softwood £766
The most longer lasting timber on the market! Doesn’t absorb water so doesn’t rot, also as water is not absorbed then any movement within the timber is minimal! Ideal even for the most challenging enviroments. Timber is guaranteed for 50 years againts rot and decay. Recommended ironmongery and fixings for Accoya is Marine Grade Stainless Steel. Can be painted or stained.
We use Grade A1 Accoya specially sorted with few knots.
Approx weight guide 510KG/M3
Meranti – Hardwood £425
Used as a Mahogany substitute. Can vary in colour from a pinky red to dark red colour.
Can be painted or stained.
Approx weight guide 550-710 KG/M3
European Oak – Hardwood £890
Oak needs no introduction, appearance wise it is a light yellow to brown colour. We use the Prime grade of European Oak with fewer knots for unbeatable strength and maximum wow factor! Recommended fixings for Oak is Marine Grade Stainless Steel.
Can be stained, as with Idigbo avoid painting.
Approx weight guide 720 KG/M3
Idigbo – Hardwood £464
A plain light brown timber which gives the Oak look but without the Oak price tag. As strong as English Oak. Also known in the trade as ‘poor mans oak’.
Can be stained, however avoid painting.
Approx weight guide 560 KG/M3