St Asaph Pedestrian Gate

Seeking sophistication without extravagance? Look no further than our St Asaph pedestrian gates. Crafted with precision using through wedged, morticed, and tenon jointed frames, the St Asaph boasts a clean flat top design with a touch of flair—a simple vision panel section adding visual interest while maintaining understated elegance.

Available made to measure in five selected timbers.

Configure your bespoke gate below from 700 to 2100mm in heigt & 600 to 1500mm in width!

Online sizes from 1400mm to 2100mm (highest points) in height & opening widths from 600mm upto 1500mm. For any sizes outside these please contact us.

We require the gate height & gate width in order to get a price/place order.

Want to use imperial instead of metric? Use our converter here

Enter your required gate height in mm, usually you will allow 50mm / 2" clearances under the gates.
Please enter required gate width
Scan Redwood (+...)
Meranti (+...)
Idigbo Hardwood (+...)
A1 Accoya (+...)
Prime European Oak (+...)
Please select from our range of timbers
Accoya is priced as suitable for painting, if you intend to stain the timber then please contact us for a price enquiries@woodworkersuk.co.uk.

Prices online are for heights between 700mm to 2100mm high (at highest point) & 600mm wide to 1500mm wide, for any sizes outside these please contact us at
enquiries@woodworkersuk.co.uk for a personalised costing.
Diagram showing and explaining how to measure for single gates
Curved joggles to give the gates strength
Curved (Standard)
Pyramid joggles to give the gates strength
Pyramid
Angled joggles to give the gates strength
Angled
Rounded joggles to give the gates strength
Rounded (+£18.00)
Inverted joggles to give the gates strength
Inverted (+£18.00)
Birdsmouth joggles to give the gates strength
Birdsmouth (+£36.00)
Joggles are the protrusions on top corners of the gates, these give the mortice & tenon joints strength. As standard the joggles are arched/curved.
Example of the open boarding within a gate
Open Boarded
Close up of a close boarded / fully boarded section of a gate
Close Boarded
Open boarded or slatted gates are great if you live in a windy area, as they allow the wind to pass through the gates. Larger close boarded gates can be difficult, at times, to open into a strong wind; you run the risk of the wind dragging them out of your hands; with an open boarded gate, this can be greatly reduced.
As standard when looking at the rear of the gate you can see the horizontal rails & braces. By making the gate double sided/boarded the central rails and braces are hidden.
Looking at the rear of the gate, is the hinge side the left OR right hand side & do you intend to fit the hinges to front OR rear of the gate?
add a full thickness bottom rail
As standard gates have bottom rail that can only be seen from rear, from the front it is covered by the cladding. Add a full thickness bottom rails means the bottom rail can be seen from both sides of the gates, bottom rail being 5 3/4" / 145mm tall with the cladding being jointed into the rail.
Fixing stile options
Posts for fixing to a wall or other structure. Priced per stile. Supplied in same timber as your gates.
Posts for fixing to a wall or other structure. Priced per stile.( 95mm x 70mm with 20mm x 20mm loose stop) supplied in same timber as your gates.
4 way weather cut softwood posts
100mm x 100mm (+£54.00)
4 way weather cut softwood posts
125mm x 125mm (+£79.20)
4 way weather cut softwood posts
150mm x 150mm (+£112.80)
square tanalised softwood posts
175mm x 175mm (+£163.20)
square tanalised softwood posts
200mm x 200mm (+£187.20)
All priced per post. As a rule of thumb post size should be for every 12" (300mm) of gate, posts should be 1" (25mm) + 1" (25mm). Posts upto 150mm / 6" square are 4 way weather cut on top. Posts over this are square cut.
ironmongery options for pedestrian gates
Ironmongery pack options will show here once you have entered the sizes required.
All packs contain 1 Pair 14" Adjustable gate hinges, 1 No 6" Ringlatch plus all fixings & 1 8" Cabin hook. (* Black on galv & Marine grade stainless steel hinge options are 18" Adjustable hinges. Cabin hook for Stainless steel is a 4" Cabin hook).
All packs contain 1.5 Pair 14" Adjustable gate hinges, 1 No 6" Ringlatch plus all fixings & 1 8" Cabin hook. (* Black on galv & Marine grade stainless steel hinge options are 18" Adjustable hinges. Cabin hook for Stainless steel is a 4" Cabin hook).
All packs contain 1 Pair 18" Adjustable gate hinges, 1 No 6" Ringlatch plus all fixings & 1 8" Cabin hook. (* Cabin hook for Stainless steel is a 4" Cabin hook).
All packs contain 1.5 Pair 18" Adjustable gate hinges, 1 No 6" Ringlatch plus all fixings & 1 8" Cabin hook. (* Cabin hook for Stainless steel is a 4" Cabin hook).
gate locking options explained
200mm / 8" Black Brenton Padbolt
8" Black Brenton Padbolt (+£3.26)
200mm / 8" galvanised Brenton Padbolt
8" Galvanised Brenton Padbolt (+£3.60)
200mm / 8" Black on galvanised Brenton Padbolt
8" Black on galvanised Brenton Padbolt (+£13.20)
200mm / 8" Marine Grade Stainless Steel Padbolt
8" Marine Grade Stainless Steel Brenton Padbolt (+£34.80)
Union Strongbolt 5 Lever insurance deadlock brass finish
Union 5 lever Insurance Deadlock (Brass coloured finish) (+£28.80)
Union Strongbolt 5 Lever insurance deadlock chrome finish
Union 5 lever Insurance Deadlock (Chromecoloured finish) (+£28.80)
Easi T 5 Lever insurance deadlock stainless steel
Easi T Stainless Steel 5 Lever Insurance deadlock (+£37.20)
Perry 70mm Double locking long throw gate lock
Perry 70mm Double locking long throw lock (+£44.40)
Perry 70mm Single locking long throw gate lock
Perry 70mm Single locking long throw lock (+£42.00)
Select your choice of locks if required. Mortice deadlocks are the most secure and operated by key from either side. Brenton Padbolts are lockable by way of a padlock (not supplied) and the Long throw locks fit to (usually the rear) of the gates, doube locking is key operated from either side, single locking is key operated from front, with latch on rear to unlock.
Any additional details you think might be relevant to help us build your bespoke product.
Grand total
Current lead times are approx 8-10 weeks at present

Description

Introducing our St Asaph pedestrian gate, main picture crafted in exquisite Idigbo and featuring a sleek linear top design complemented by a ‘vision style panel’ just below.

Elevate your entrance with our bespoke options, offering this elegant gate tailored to your exact specifications in luxurious European Oak, Meranti, Idigbo, or Scandinavian Redwood.

Dreaming of a coordinated entrance? Picture the perfect pair of timber driveway gates harmonizing with your home’s aesthetic. With the St Asaph available in an open boarded design, the possibilities for enhancing your curb appeal are endless.

Yearning for a gate that offers a glimpse beyond? Opt for our open boarded version, allowing light and air to flow freely while preserving privacy. Need a smaller gate for your garden or a grand entrance for your driveway? The St Asaph comes in various sizes to suit your needs.

With five premium wood options to choose from, the St Asaph gate isn’t just a practical addition—it’s a statement piece that can be seamlessly integrated with matching driveway and garden gates, ensuring a cohesive and captivating entrance to your home.

St Asaph pedestrian gate – specifications

All top edges on any horizontal rails of the St Asaph gate feature an angled water run off, this stops the build up of moisture on your gates and makes for a longer lifespan. The stiles of the St Asaph gate (vertical outer uprights of the gate frame) also have rounded outer edges.

Construction – Through wedged, morticed & tenoned jointed
Height – Made to measure
Width – Made to Measure
Stiles – 2 3/4″ x 2 3/4″ / 70mm x 70mm
Top rail/Head & Full thickness mid rails – 2 3/4″ x 2 3/4″ / 70mm x 70mm
Hidden rails (visible from rear only) – 2 3/4″ x 1 7/8″ / 70mm x 48mm
Boarding – 3 3/4″ x 7/8” / 95mm x 15mm
Infill (top ‘open vision panel’ section)– 1 3/4″ x 3/4″ / 45mm x 18mm (with gaps of no more than 8″/200mm between uprights)

 

Manufactured in the following five selected kiln dried timbers –

Prime European Oak (Hardwood)
Accoya (Acetylated Softwood)
Idigbo (Hardwood)
Meranti (Hardwood)
Scandinavian Redwood (Softwood)

 

Our Guarantee

Gate Expectation’s mission is to bring the highest quality bespoke measured wooden gates, side hung wooden garage doors and general joinery items to the market at a quality and price point that can’t be matched.

If not completely satisfied we offer 30-day no hassle returns on all our off-the-shelf range.

Three generations of master carpentry and joinery experience in each and every product. Read more about our history here.

Imperial Converter