Wooden driveway gates
All our hardwood driveway gates (European Oak, Meranti and Idigbo) and softwood driveway gates (Scandinavian Redwood) are made to measure specifically to fit your openings in both height and widths. All gates are based on 70mm (2 3/4") thick through wedged morticed and tenon jointed frame. For more information, and pictures of any of our wooden driveway / Enterance gates below, please click on the respective images below, which will give you more information. As all our driveway gates (and everything else!) are bespoke made to measure, we are unable to issue a price list covering all the various height and widths combinations that we manufacture; please contact us for a personalised costing. The driveway gates on this page are listed in order of cost, the dearer gates being nearest the top of the page. If you see a gate you are interested in, or would like to know more about, then please, don't hesitate to contact us with the sizes required for a full individual and personalised gate costing.
All of our wooden driveway gates can be customised please see 'customise your wooden gates' for more information.
For bigger pictures, rear views and more information of any of our wooden driveway gates please click on any of the pictures of the relevant gates below.
Beaumaris driveway gates
Shown right is the fully boarded Beaumaris wooden driveway gate in Meranti. This is also available in European Oak, Idigbo and in Softwood.
The curve rises by 6'' (150mm) from the lowest point. Alternatively, if you prefer, the curve can slope down from the stiles to the centre. We only make gates to suit your requirements.
The Beaumaris is also available as open boarded wooden gate.
More on our > Beaumaris driveway gates
Curved headed driveway gates
Shown left is a close boarded pair of Curved headed wooden driveway gates in Idigbo (Hardwood). The curve rises by 3'' (75mm) from the lowest point to the highest, though other rises can be accomodated if you wish. This is also available in European Oak, Meranti (Hardwood) and Scandinavian Redwood (Softwood).
Again, if you prefer, the curve can slope down from the stiles to the centre (low centre), the high centre version is shown. Interested? Contact us to find out more.
Our Curved headed pairs are also available as an open boarded gate and as a pedestrian gate.
More on our > Curved headed driveway gates
Harlech driveway gates
Shown right is a pair of our fully boarded Harlech timber driveway gates in beautiful Scandinavian Redwood (Softwood).Our stunning Harlech driveway gates are also available made to measure in European Oak, Meranti and in Idigbo (Hardwoods). Our Harlech gates feature an attractive curved underswept head. This is also available as an open boarded gate and as a pedestrian gate. Why not have the matching set outside your house?
More information > Harlech wooden driveway gates
Caernarfon driveway gates
Shown left is a close boarded pair of Caernarfon wooden driveway gates in softwood. As with the Beaumaris gte, the curve rises by 6'' (150mm) from lowest point, though other rises can be accomodated to suit your requirements. These are also available in European Oak, Meranti and Idigbo (Hardwood) if you prefer.The curve can slope down from the stiles to the centre (low centre) if you prefer. The high centre (rising to the middle) version is shown here.
The Caernarfon is also available as open boarded gate.
More on our > Caernarfon driveway gates
Bala driveway gates
Right is a pair of our Bala driveway gates in stunning softwood.
These are available made to measure to accomodate your preferences in European Oak, Meranti and Idigbo (Hardwoods) as well as in Scandinavian Redwood (Softwood).The Bala is also available as an open boarded gate and also as a single pedestrian gate . How good would your home look with these in the driveway?
More information > Bala wooden driveway gates
St Asaph driveway gates
Shown left is a pair of our St Asaph driveway gates in Scandinavian redwood (Softwood).This simple design is available made to measure in European Oak, Meranti and Idigbo (Hardwoods) and Scandinavian Redwood (Softwood) and features a straight rail aong the top.The St Asaph is also available as an open boarded gate and also as a single pedestrian gate . Why not order these for your driveway? Contact us for more details and to discuss a personalised costing for your home.
More on our > St Asaph driveway gates
Colwyn driveway gates
Shown right is our close boarded Colwyn pair in Meranti (Hardwood). The Colwyn driveway gates feature an elegant sloping head that rises 6" (150mm) from the lowest point to the centre.These are also available made to measure specifically for your specifications in European Oak, Idigbo (Hardwoods) and Scandinavian Redwood (Softwood).The Colwyn is also available as an open boarded gate and also as a single pedestrian gate . Like the look of these? Contact us for more information.
More information > Colwyn driveway gates
Nannerch driveway gates
Our Nannerch wooden driveway gates (left) in Meranti (Hardwood). The Nannerch driveway gates feature a diminishing gunstock head that drop s a total of 2 3/4" (70mm) from it highest point.
As with all of our gates the Nannerch driveway gates are made to measure (in both height and widths) and are available in European Oak, Idigbo, Meranti (all Hardwoods) and Scandinavian Redwood (Softwood).
Also available with a matching pedestrian gate.
More information > Nannerch driveway gates
Denbigh driveway gates
Pictured right is a pair of our Denbigh wooden driveway gates in Scandinavian Redwood (Softwood).
This simple design is available made to measure in European Oak, Meranti and Idigbo (Hardwoods) and Scandinavian Redwood (Softwood). These gates would ensure complete privacy and security for your home.
The Denbigh is also available as an open boarded gate and also as a single pedestrian gate . Have these caught your eye? Contact us to find out more!
Bespoke wooden driveway gates
If you are after something a bit different ir individual, or maybe you are trying to
match to exisiting wooden gates or fences and you have your own gate design
in mind, then please see our bespoke wooden gates page for more
information on how to obtain an individual costing and get a door manufactured to
your own personal design. If you can sketch it, we can make it!
More on > Bespoke wooden gates
Obtaining a personalised costing for any of our wooden driveway gates couldn't be easier; simply select your preferred style (don't worry if you have more than one design in mind, we are very happy to provide costings on more than one style of our gates) and contact us via telephone for an immediate costing, or via Email (address at top of page), fax, or by calling into our workshops. If you are thinking of having a bespoke design, we would, in most cases, require a picture/sketch of the design in order to provide an accurate costing.
Need hinges, locks or gate dropbolts?
Then please see our wooden gate ironmongery section for more information.
Wooden driveway gate specifications
Heights - All our wooden gates are made to measure to the height required,
Widths - All our wooden gates are made to the widths required,
Stiles all Ex 3 " x 3 " (75mm x 75mm),
Top rails Ex 3 " x 3 " (75mm x 75mm),
Barefaced centre rails (only visible from rear of gate) EX 3" x 2 1/4" (75mm x 57mm)
T&G boarding all Ex 4" x 3/4 " (100mm x 19mm)
If you like any of our wooden driveway gates then please contact us with the sizes you require for a full personalised costing.
Home | Timber gates | Timber pedestrian gates | Timber estate gates | Timber garage doors
Bespoke wooden gates | How to measure | FAQ | Sitemap