Monkey Tail Bolts Black or Galvanised

£10.64£20.39
Perrys monkey tail bolts available in a black or galvanised finish. Available in a range of sizes: 12" / 300mm, 15" / 375mm, 18" / 450mm & 24" / 600mm Supplied with both BZP flat plate and galv staple receivers. Bolt size 16mm Fixings are available as an optional extra.

Oval Padbolts

£3.78
4" / 100mm Oval padbolt in a choice of black or galvansied finish. Fixinngs (coachbolts) are available as optional extras.

Perry Auto Locking Pig Bolt

£15.31
150mm / 6" Auto locking pig bolt. This automatic locking bolt when fitted with the bottom guard prevents opening by animals.

Perry Chain Hook On Plate

£3.38£4.24
Holds chain or rope securely. 50mm x 50mm (2 inch square) plate. Available in six coloured finishes Supplied with all fixings (BZP screws, not coloured)

Perry Colourful Saddle Trolley

£95.98
With a bridle hook and saddle rack, this Tack Trolley from Perry Equestrian is great for moving tack and equipment around the stables. Available in Black, Blue, Red, Pink

Perry Field Gate Hinge Sets (Bottom Hinge Adjustable) on 4″ Square Plates Galvanised

£23.22£31.38
Commonly found on field gates, the field gate hinge sets when fitted with the hinge plates within the gate opening (rather than the front or rear of the gate posts) can allow the gates to open both in and out. Hinges wraparound both gates hence the alternate name of wraparound hinges. Sizing refers to the top hinge only, bottom hinge is supplied in two pieces that clamps around bottom stile of gate and allows for adjustment by way of a threaded bolt. Suitable for gates 3" / 75mm thick. Sold per set (enough for one gate) and supplied with all fixings for a typical installation.

Perry Field Gate Hinge Sets on 4″ x 4″ Plates Galvanised

£25.22£28.68
Commonly found on field gates, the field gate hinge sets when fitted with the hinge plates within the gate opening (rather than the front or rear of the gate posts) can allow the gates to open both in and out. Hinges wraparound both gates hence the alternate name of wraparound hinges. Sizing refers to the top hinge only, bottom hinge is a standard size of approx 150mm to hinge pin centre. Sold per set (enough for one gate) and supplied with all fixings for a typical installation. Supplied with all screws & bolts Suitable for gates 3" / 75mm thick.

Perry Fieldgate Shoot Bolts

£11.98
Designed as a gate securing catch for gates fitted between posts and can also be fitted to the inside of the gate if required. Supplied with fixings.

Perry Heavy Duty Cross Pattern Door Bolts

£17.33£22.58
Our heavy duty cross pattern door bolts are available in 300mm/12", 450mm/18" and 600mm/ 24" options. A very strong security product generally used on large type garage and industrial / agricultural doors.

Perry Hooks to Build 11mm pin 115mm Brickwork self colour

£7.19
Sold in pairs, the hooks to build are suitable for use with 4 1/2 inch (115mm) brick/blockwork (single skin). Used when you intend to hang gates from brickwork or blockwork pillars, the hooks to build are built in as the pillars are built and bedded in mortar between courses of your brickwork. Available in  a self colour finish with an 11mm pin.

Perry Hooks to build for 9 inch brickwork

£12.71£17.42
Sold in pairs, the hooks to build are suitable for use with 9 inch (225mm) brick/blockwork (double skin). Used when you intend to hang gates from brickwork or blockwork pillars, the hooks to build are built in as the pillars are built and bedded in mortar between courses of your brickwork. Available in a choice of three pin sizes, 11mm ( 7/16"), 19mm (3/4") and 22mm (7/8"). 11mm and 19mm pin sizes of the hooks to build are available in a hot spelter galvanised finish, the 22mm version is only available in a self colour finish.

Perry Hunting Type Self Locking Auto Gate Catch & Striker Pin

£17.35
The hunting type self locking auto gate catch does the same job as the standard self locking auto gate catch but with the added benefit that if you are a horsey person then you don't need to dismount to operate the catch. Simply pull the gate closed to engage the catch or combine with a gate spring to automatically close the gate and engage the catch once you are through the gate. Can be locked with a padlock (not supplied) by means of a pre-formed hole in the latch plate. The hunting type self locking auto gate catch come with striker bar and all fixings.